1.
Wind-induced lateral vibration of a 7500t floating crane's boom considering axial clearance between boom and pin hinge
7500t浮吊臂架考虑铰支座间隙的风致横向振动研究
2.
pylon diagonal drag brace
吊臂架交叉阻力支撑条
3.
Control Arm Bushing To Suspension Cradle Retainer
控制臂衬套与悬吊架扣环
4.
Stress analysis of constant hanger arms
核级恒力弹簧吊架回转臂的应力分析
5.
Any of various devices with a swinging arm, as in a fireplace for suspending a pot.
吊架有摆动臂杆的多种装置的统称。如将锅架在火炉上的吊架
6.
Position the lower suspension arm at the axle bracket and rear bracket.
把下端悬吊臂放在车轴支架和后侧支架上。
7.
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。
8.
Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。
9.
Stress Testing and Finite Element Analysis of a Heavy Crane Boom of Truss Structure;
大型桁架起重吊臂的应力测试与有限元分析
10.
Her right arm was in a sling.
她的右手臂用吊带吊着。
11.
Remove bolts holding front of suspension crossmember to frame rails under upper control arms.
卸下将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
12.
Install bolts holding front of suspension crossmember to frame rails under upper control arm.
安装将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
13.
Study on Parametric Modeling and Dynamic Response for Jib Structure of Deck Crane Based on APDL;
基于APDL的甲板吊臂架结构参数化建模及动态响应研究
14.
The Finite Element Analysis and Research for Its Intensity and Toughness of Lift Arm and Bracket of Heavy Wrecker;
重型清障车吊臂和托架强度刚度的有限元分析研究
15.
32-metre 4-arm placing boom
32米4臂浇灌吊杆
16.
Remove rear lower suspension arm bolts.
拆卸后下端悬吊臂螺栓。
17.
electricwall type slewing crane
电动墙式旋臂吊车、电动壁吊
18.
The aim of the derrick latched onto the cotton bales and lifted them into the hold.
起重机吊臂抓住棉花包，把它们吊进货舱。