1.
Research on Hydroforming of Profiled Cross-section Hollow Component;
异形截面空心结构件内高压成形工艺研究
2.
Tube Hydroforming Technology and its Application to Vehicle Lightweighting
内高压成形工艺及其在汽车轻量化中的应用
3.
X-joint Tube Hydroforming Processing Analysis Based on FEA
基于有限元仿真的四通管内高压成形工艺分析
4.
Finite Element Simulation and Technique Analysis of X-joints Hydroforming Process;
四通管内高压成形有限元模拟及工艺分析
5.
Numerical Simulation and Optimization of Hydroforming of T-shaped Tube;
T型管内高压成形数值模拟及工艺参数优化
6.
Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique
薄壁小半径弯管与中压内胀成形工艺
7.
Experimental research on spin-forming of cup-shaped thin-walled trapezoidal inner-gear
杯形薄壁梯形内齿旋压成形工艺的试验研究
8.
Research on Computer Simulation of Internal High Pressure Forming of Tubes and Its Optimization of Process Parameters;
管材内高压成形的计算机模拟研究及其工艺参数优化
9.
Study on Ball Spinning of Tubular Parts with Longitudinal Inner Rib
纵向内筋筒形件滚珠旋压成形的工艺研究
10.
Simulation and experimental study on cold extrusion forming technology of hole-through internal gear
贯通内齿轮冷挤压成形工艺仿真与试验
11.
Design optimization for warm forming process of engine shell of high strength steel
高强度钢发动机壳体温挤压成形工艺优化设计
12.
The Technology Analysis and Experimental Research on Round Extrusion Part with Intra-cavity Rib Forming of Aluminum Alloy;
铝合金内腔带筋筒形挤压件成形工艺分析与实验研究
13.
Forming Technology and Quality Assessment Investigation on Cup-shaped Thin-walled Inner Gear Formed by Spinning
杯形薄壁内齿轮旋压成形工艺分析及质量评定研究
14.
The Research on the Forming Process of Cup-shaped ZA27 Alloy Squeeze Casting with High Ratio of Height to Thickness;
大高厚比ZA27合金杯形铸件挤压铸造成形工艺的研究
15.
Technological Analysis and Cold Extrusion of Two-exit Components with Ring Shape
两出口环形件的冷挤压成形工艺研究
16.
Inner ratchet's cold extrusion process design and numerical simulation
飞壳内棘齿冷挤压成形工艺设计及数值模拟分析
17.
Influence of backward extrusion punch shape to the extrusion process
反挤压凸模形状对挤压成形工艺的影响
18.
Study on Near-net-shape Hot-pressing of Mg Extruded Preform
镁合金挤压预成形坯模压近终成型工艺研究