1.
Effect of Stirring Magnetic Field on the Macrostructure and Composition of Ti1023 Titanium Alloy Ingot
搅拌磁场对Ti1023铸锭宏观组织和成分的影响
2.
Effect of Electromagnetic Frequency on Microstructure of 4045 Alloy Produced by CREM Process
电磁场频率对4045合金CREM铸锭微观组织的影响
3.
Effects of Casting Process on Ingot Microstructure and Forgeability of B30 Alloy
铸造工艺对B30合金铸锭组织及可锻性的影响
4.
Microstructure and Solidification Simulation of Φ480 ZK60 Mg Alloys Cast Ingot;
工业态Φ480ZK60镁合金铸锭组织研究及凝固模拟
5.
Effects of Ultrasonic Power on Solidification Structure in AZ31B Alloy Ingots
超声振动功率对AZ31B镁合金铸锭凝固组织的影响
6.
Effect of ingot gas holes on the structure and performance of 4032 aluminum alloy
铸锭气孔对4032铝合金组织和性能的影响
7.
Effect of sizes of semicontinuous casting ingots on as-cast microstructures of Al-6.5Zn-2.3Mg-2.3Cu alloy
半连续铸锭尺寸对Al-6.5Zn-2.3Mg-2.3Cu合金铸态组织的影响
8.
Effect of Melt Temperature in Outside Ladle on Microstructure and Hardness Distribution of 7075/6009 Aluminum Alloy
外浇包熔体温度对7075/6009铝合金铸锭组织和硬度分布的影响
9.
Influence of arc current on solidification microstructure of Ti-10V-2Fe-3Al under vacuum arc melting
真空自耗电弧熔炼电流对Ti-10V-2Fe-3Al铸锭凝固组织的影响
10.
Effect of Different Electromagnetic Field Application Ways on Microstructures and Mechanical Properties of Semi-Continuous Cast Magnesium Alloy Billets
电磁场施加方式对半连续铸造镁合金锭坯组织与性能的影响
11.
Thermodynamic Analysis of Chemical Reaction in Melting Process of Mg-Li Alloy and Microstructure of Ingot
Mg-Li合金熔炼反应的热力学分析及铸锭显微组织
12.
Effect of Vertical Probe Location on Crystal Structure of Ultrasonic Ingot of Al-2%Si Alloy During Solidification
超声波探针垂直位置对Al-2%Si铸锭凝固组织的影响
13.
Effects of extrusion speed and billets of electromagnetic casting on microstructure and mechanical properties of AZ31 magnesium alloy sheet
挤压速度和电磁铸造锭坯对AZ31镁合金板材组织和性能影响
14.
The Structure and Its Characteristics Analysis of Aluminum Foam Ingot Fabricated by Molten Frothing Process Using SiC Particles Adhered Melt
SiC颗粒自增粘熔体发泡法制备泡沫铝铸锭的组织及其特征分析
15.
Effect of Ultrasonic Probe Area of End Face on Solidification Structure of Al-1%Si Ingots
超声波传振杆的端面面积对Al-1%Si铸锭凝固组织的影响
16.
Effects of position of submerged entry nozzle in mould on composition and structures of 7075/6009 Al alloy ingots
内熔体浇口位置对7075/6009合金铸锭成分和内层组织的影响
17.
Improvement on the de-moulding mechanism for 20 kg aluminium ingot continuously casting machines
20kg铝锭连续铸造机组脱模机构的改进
18.
Influence of Different Roll Casting Process Parameters on Casting Microstructure
不同铸轧工艺参数对铸轧微观组织的影响