1.
Realization of the Measurement System for the Indentation Diameter of Brinell Hardness Test Using Image Measurement
布氏硬度试验压痕直径的图像测量及实现
2.
Design for Measuring Software of Indentation Diameter Measurement Based on Mixed Programming of Matlab and VB
基于Matlab与VB混合编程的压痕直径测量软件设计
3.
Uncertainty Evaluation about Impress Diameter of Lamp Insulated Material in the Heat-resistant Test
灯具绝缘材料在耐热试验中压痕直径的不确定度评定
4.
The specimen is removed, and the diameter of the impression is measured with a low-power microscope fitted with a graticule or measuring scale.
取出试样，用带有网格或测微目尺的低倍显微镜测量压痕的直径。
5.
Causes of Dinge by Plate Flattener and its Solution Measures
关于板材矫直机压痕的成因及主要消除对策
6.
The Reason’s of Plate Leveller Roll Indentation and Major Solution Measure
板材矫直机压痕的成因及主要消除对策
7.
He could see the imprints of them in the mud, running along straight and purposeful, leading direct to the Wild Wood.
河鼠看到泥地上靴子的印痕，目的明确，径直奔野林的方向而去。
8.
The Investigation on the Radial Climb Somigliana Ring Dislocation and Its Applications in the Indentation Fracture;
径向Somigliana攀移型位错环的研究及其在压痕断裂中的应用
9.
Influence of tube blank diameter on necking forming under outer pressure in viscous medium
筒坯直径对黏性介质外压缩径成形的影响
10.
Nominal diameter of pressure vessel
GB/T9019-1988压力容器公称直径
11.
The center of pressure is about 1-11/2 diameter in front of the center of gravity.
压力中心大约在重心之前1-11／2 直径。
12.
The measurement of scotopic pupil diameter with noncontact tonometer
非接触眼压计测量暗适应下瞳孔直径
13.
Numerical simulation of injecting cement design parameters for the large diameter bored pile
大直径钻埋桩压浆设计参数数值仿真
14.
Major diameter welded steel pipe for low-pressure liquid service
GB/T14980-1994低压流体输送用大直径电焊钢管
15.
Here is a 1.3 cm left adrenal adenoma found in a patient with hypertension.
高血压病人左侧肾上腺的直径为1.3厘米的腺瘤。
16.
CAVITATION MODEL FOR THE LOW-PRESSURE LARGE-DIA SELF-EXCITED PULSE NOZZLE
低压大直径喷嘴自激脉冲射流空化模型
17.
The rating curve between the flux of the pulverized coal and the tob pressure and aperture of orifice-plate flow meter is a parabolic one.
煤粉流量与顶压及孔板直径成抛物线关系。
18.
The Development about Framework and Assembling & Adjusting System of the Large Diameter Measurement System with Idler Wheels;
大直径多滚压轮测量仪支架及装调系统研制