1.
Evolution of ultra-fine austenite grains in Nb and Nb-V-Ti microalloyed low carbon steel under cyclic heating-quenching treatment
循环加热-淬火工艺下超细晶奥氏体的晶粒演变特征
2.
dynamic hardening
快速加热冷却淬火法
3.
tension electric process
电流直接加热淬火法
4.
Development of Scans Induction Hardening Process for Single-Tooth;
单齿连续感应加热淬火工艺技术研究
5.
Study on the Flame Heating Quench Strengthen Test of Tianium Alloy Plate
钛合金板材火焰加热淬火强化试验研究
6.
So we found that hardening operation is make up of heating and quench.
因此我们发现淬火工序包括加热和淬硬两个步骤。
7.
Successive Induction Heating and Hardening Process Research on Gear Copy Profile
齿轮仿齿形连续感应加热淬火工艺研究
8.
Research on Heat Treatment Technology of 5CrMnMo Hot Forging Die
5CrMnMo热锻模淬火工艺研究
9.
circular auto-control heating oven
自动控制循环加热炉
10.
austemper stressing
等温淬火表面应力;等温淬火前加应力;加工应力等温淬火
11.
An Experimental Exploring on Machining Internal Thread of Hardened Steel by EDM
电火花加工淬火钢螺纹孔的实验探讨
12.
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火，回火和退火。
13.
As the products of combustion circulate, they heat and feed water.
燃烧产物循环时便加热供水。
14.
The Design of Heating/cooling Circulator s Electric Control System;
加热/制冷循环器（电控部分）的设计
15.
Adopted far infrared metal heating tube, fast heating and energy saving.
采用远红外线金属电热管加热、热风循环，加热速度快、温度均匀、省电。
16.
Comparative study on instantaneous heating and circulation heating modes of ASHPWH
空气源热泵热水系统即刻加热模式和循环加热模式的对比
17.
The Application of SIMATIC S7-300 PLC in Circular Quenching Furnace for Wheel
SIMATIC S7-300 PLC在车轮环形淬火炉中的应用
18.
modified austemper
(获得珠光体加贝氏体混合组织的)准等温淬火(如铅淬火)