1.
Reason Analysis of Breakout by Sticking for Slab CCM in Jigang
济钢大板坯连铸机粘结漏钢原因分析
2.
The Application and Investigate of the Moldexpert System in the CCM
基于结晶器专家模型控制系统的大板坯连铸机
3.
Project construct & production practice of straight arc slab CCM at No.3 Steel-making Plant of Jigang
济钢三炼钢直弧型大板坯连铸机的工程建设与生产实践
4.
Reason Analysis and Countermeasures of Influencing the Service Life of Slab CCM Segment
影响大板坯连铸机扇形段寿命的原因分析及对策
5.
THE ANALYSIS AND COUNTERMEASURES OF FREQUENT DAMAGE OF VAI SLAB CASTER HORIZONTAL SEGMENTS
VAI大板坯连铸机水平段频繁损坏分析及改造措施
6.
Installation Technology of Hoisting the Ladle Rotary Equipment of 2150 Continuous Slab Caster
2150板坯连铸机大包回转设备安装技术
7.
Optimization of secondary cooling scheme of combined caster
方/板坯连铸机浇铸矩形坯二冷制度优化
8.
Design and performance of thick slab CCM
鞍钢厚板坯连铸机的设计及使用效果
9.
Detection and Control of Instrument for AISC No.2 Slab Continue Caster
鞍钢2号板坯连铸机仪表检测与控制
10.
Exploration on Selection of Lubrication Grease Used in 1900mm Slab Continuous Caster
1900毫米板坯连铸机润滑脂的选用探讨
11.
Complete Set of Equipment of Continuous Casting Machine for 1350mm Plate-Slab in PISC(Panzhihua Iron and Steel(Group)CO.)
攀钢1350毫米板坯连铸机成套设备
12.
Simulation Study on the Continuous Caster Imitating Technology Based on Virtual Reality;
基于VR的板坯连铸机仿真技术研究
13.
Water Simulation Study of Mold at Chonggang 2# Slab Continuous Caster;
重钢2#机板坯连铸结晶器水力学模拟
14.
Carrying Out the Secondary Water cooling Controlling of Slap Caster;
板坯连铸机二冷水自动化控制的实现
15.
Practice of Electrical Transformation of Flame-cutting Machine for Slab Continuous Casting
板坯连铸火焰切割机的电气改造实践
16.
Exploiture and Research of ASTC Centralize Calibration Function on Slab Continuous Caster System
板坯连铸机ASTC集中检验的研制与开发
17.
Feasibility Study of the Bale and Covered Equipment is Installed on the Foundation of Panzhihua Steel Research Faculty 1#1350 Linked Casting Blank Machine;
板坯连铸机回转台增设大包加盖装置的可行性分析
18.
Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster
圆坯连铸机浇铸20钢铸坯的生产实践