1.
M701F Gas Turbine Valve Calibrating Method,Fault Analysis and Remedy
三菱M701F型燃机阀门校验方法及故障分析与处理
2.
Pressure testing for general purpose valves
GB/T13927-1992通用阀门压力试验
3.
Numerical Simulation of the Sound Field and Experiment Research of Valve Inner Leakage;
阀门内漏的声场数值模拟及实验研究
4.
There shall be semi-auto change over system in the gas yard and main pressure valve and relief valves should be located outside the lab building.
安装半自动转换阀控制气瓶更换，主要的控制阀门和减压阀门都安装在实验室外。
5.
Specification for selection inspection and acceptance of steel valves used in petrochemical industry
石油化工钢制通用阀门选用、检验及验收
6.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
7.
All safety valves will undergo popping tests by the Licensee.
所有安全阀门将由被许可方进行爆裂试验？
8.
Simulation of Heat Transfer in Cryogenic Treatment and Design of a Test System for Cryogenic Valves;
深冷处理传热模拟及低温阀门试验系统设计
9.
Study on Complicated Separation Flow Behind the Reversed Tainter Valve of the Filling and Emptying System for Navigation Lock;
通航船闸输水阀门后复杂分离流试验研究
10.
Experimental Study of Artificial Bile Ducts with Bionic Valve in Vivo of Dogs
具有仿生阀门的人工胆管在犬体内的实验研究
11.
Research on Energy-Saving Technology of Utilizing Residual Pressure by Valves Regulating on Water Supply
阀门控制利用管网余压供水节能试验研究
12.
General purpose industrial valves-Diaphragm valves
GB/T12239-1989通用阀门隔膜阀
13.
pneumatic cylinder cock valve
风动汽缸排水阀阀门
14.
solenoid value
电磁阀, 电磁活门
15.
Lift out the disc holder assembly from the body of the valve.
从阀门的阀体内提起阀瓣固定器总成。
16.
All valve seats and seat discs shall be replaceable.
所有阀门阀座和阀座阀瓣应该是可更换的。
17.
" Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Wafer valves"
GB/T15188.2-1994阀门的结构长度对夹连接阀门
18.
Complete valve data: figure number and valve size.
完整的阀门参数：型号和阀门通径。