1.
Microstructure and composition of the coating were analyzed with SEM and EDS, respectively.
借助扫描电镜以及能谱仪对涂层的组织结构、形貌以及涂层成分进行了分析。
2.
Composition Design and Properties of Laser Clad Ni-Zr-Al Alloy Coating on the Magnesium Surface
镁合金表面激光熔覆Ni-Zr-Al合金涂层成分设计与组织性能
3.
The Separation Methods between Coating Agent and Fabric from Coated Fabric and the Investigation on Its Component;
涂层织物中涂层剂与基布剥离方法和成分分析的研究
4.
Research for Anti-oxidation Performance of Al-Si Coating with Different Content;
不同成分Al-Si涂层的抗氧化性能研究
5.
Study on Removing of Coating Agents in Fiber Component Analysis of Coated T/C Fabric;
涤/棉涂层织物纤维成份分析中涂层剂去除方法研究
6.
The Relationship between the Composition of the Bonding Layer and the Interface Electron Structure of the Thermal Barrier Coatings;
粘结层成分与热障涂层界面电子结构的关系
7.
Composition and microstructure analysis of controlled atmosphere spraying deposit
可控气氛热喷涂沉积层的成分及组织分析
8.
Phase Analysis and Residual Stress Distribution in the Depth of Fe-Ni-B Shielding Coatings
Fe-Ni-B屏蔽涂层相组成及残余应力分布研究
9.
filter-paper coated cut to circular shape
带涂层过滤纸,切成圆形
10.
low pressure synthesis of superhard coating
超硬涂层的低压合成
11.
Buckling Failure Analysis in Plasma-sprayed Thermal Barrier Coatings
等离子喷涂热障涂层的屈曲失效分析
12.
Analysis on Residual Stresses of Plasma Sprayed NiCrAl Coatings
等离子喷涂NiCrAl涂层残余应力模拟分析
13.
Common problems of waterborne coating gum in coating finish and relative solutions
水性涂层胶涂层整理常见问题分析及对策
14.
Analysis of the Interface Bonding Strength and Formability of the Nickel Coating Electrodeposited Steel Sheet
电沉积镍涂层钢板的界面结合强度和成形性能分析
15.
Composition Design、Laser Fabrication and Corrosion Behavior of FeNiCrAl Alloy Coating
FeNiCrAl合金涂层的成分设计、激光制备及腐蚀性能研究
16.
Analysis Familiar Flaw on Resistance-reducing Internal Coating with Liquid Epoxy Formed Process for Steel Piping
钢质管道液态环氧内涂层成型过程常见缺陷分析
17.
Thermal Stress Analysis of Laser Clad WC/Co Multilayer and Single Layer by Using Finite Element Method;
激光熔覆WC/Co多层过渡涂层与单层涂层的热应力有限元分析
18.
Surface-coating techniques may be classified into two major types: brittle coatings and photoelastic coatings.
表面涂敷技术分为两个主要类型：脆性涂层和光弹性涂层。