1.
Plan of Scrap Iron Treatment of Cold Stamping and Trimming Die for the Auto-Cover
汽车覆盖件冲裁修边模铁屑处理方案
2.
What is the main difference when designs a blanking-die for either aluminum or SPCC?
冲铝件与冲铁件之冲裁模在设计上的主要差异为何？
3.
Judge and Put Up Edge Layout and One Die Forming for the Complex Shape Stamping Parts
裁搭边排样与复杂形状冲压件的一模成形
4.
wash-and-drive method
边冲出钻屑边打入套管钻进法
5.
Reasons and Solutions of the Waste Materials Palpitation in the Progressive Blanking Processes
级进冲裁中跳屑现象的原因与解决方法
6.
A Study on Function-Oriented CAD of Panel Trimming and Punching Die Design;
面向功能的覆盖件修边冲孔模CAD系统的研究
7.
shaving allowance
(冲压用语) 修边余量
8.
All of the punching border-linking process of thin wall small part shaping process of negative angle crimping and inserted structure of shaping and cutting ingot-stripped for designed parts are analyzed.
分析了薄壁小零件的冲裁接边工艺,负角度弯边的成形工艺,设计零件成形切断脱模的镶块结构。
9.
Study on the Design and Technique of the Combined Punching for Core Stacking Pieces of Large and Middle Electric Machine
大中型电机铁芯冲片复式冲裁设计技术的探讨
10.
NC Machining Process of Trimming-Punching Die for the Right/Light Middle Door Chute Strength Plate
左/右中门滑道加强板修边冲孔模的数控加工工艺
11.
South and North Korea have also agreed to repair railways and highways linking the two Koreas. Work is already underway to clean up landmines in the buffer zone between the two Koreas.
南北韩也同意修护连接南北韩的铁公路，两韩边界缓冲区目前正进行扫除地雷行动。
12.
Study on the Treatment of Analogous Organic Wastewater Using Iron-Carbon Microelectrolysis Method
铁屑-炭粒微电解法处理模拟有机废水研究
13.
Research on TNT wastewater treatment by electro-hydraulic pulse discharge/iron-inner-electrolysis
电液压脉冲放电与铁屑内电解法联用处理TNT废水试验研究
14.
Amendment to the Multiferroic Landau Model of BiFeO_3
BiFeO_3多铁Landau模型的修正
15.
a brief skirmish on the frontier
边界上的小规模冲突
16.
The structure and composition of work area of blanking lower die were discussed in this paper.
讨论了冲裁凹模工作部分的结构组成。
17.
An Experimental Study and Numerical Simulation on Dual Positive Clearance Blanking;
双重正间隙冲裁试验研究及数值模拟
18.
Study on Contact-impact Dynamic Response of the Die in Sheet Metal Stamping;
板料冲裁过程中模具的碰撞响应研究