1.
Measuring and Analysis of Pitch Deviation and Tooth Form Deviation of Bevel Gear
锥齿轮齿距及齿形偏差测量与分析方法
2.
limit deviation of root circle diameter
齿根圆直径极限偏差
3.
Research on Measuring Technology of Ultraprecision Gear Total Cumulative Pitch Error;
超精密齿轮齿距累积总偏差测量技术的研究
4.
Research of On-Line Measuring Principle and Technology of Large Gears Pitch Error;
大齿轮齿距偏差在机测量原理与技术的研究
5.
Finite Element Contact Analysis of Helical Gears with Surface and Shaft Deviations
考虑齿面及轴线偏差的斜齿轮接触有限元分析
6.
crown (bevel) gear
差动器侧面伞齿轮，冠形齿轮
7.
Amending the Shape of Pinion and Reducing the Round-gear Error;
修正小齿轮表面齿形降低圆弧齿轮传动误差
8.
The ring gear (bolted to the differential case) rotates the case
环形齿轮（栓在差速箱上）驱动差速箱
9.
horizontaldischarge tube
水平偏转放电锯齿波形成管
10.
Adopting the engaging process of the measuring rack- probe, the error of straight generatrix is measured, and by error analysis, the tooth profile error and tooth orientation error can be obtained.
采用刃边齿条测头,测量齿轮廓面的直母线偏差,通过误差分析分离出齿廓总偏差和螺旋线总偏差。
11.
Parameterize Tooth Profile Slope Deviation Measuring Uncertainty in Gear Measuring Center Standard
齿轮测量中心标准中齿廓倾斜偏差测量不确定度参数的确定
12.
Research on Measuring Uncertainty Parameter of Tooth Profile Slope Deviation
齿廓倾斜偏差测量不确定度参数的确定
13.
Effect of Machine Tool Errors on the Tooth Form of Spiral Bevel Gears
机床误差对螺旋锥齿轮齿形的影响规律
14.
Buttress threads with 3 and 30 degrees flank angle-Tolerances
GB/T13576.4-1992锯齿形(3°、30°)螺纹公差
15.
Formation Error of Archimedes Gear Hob and Its Correction
阿基米德齿轮滚刀的造形误差及修正
16.
Research Tooth Profile Error of ZK_Worm Based on 3D Simulation;
基于三维仿真ZK蜗杆齿形误差的研究
17.
The Formation and Function of Two Concepts of Extended Symmetry and Deviation Number;
拓展对称与偏差数概念的形成及作用
18.
Study of On-machine Measuring Principle and Technology of Large Gear Based on Straight Generatrix Family Deviation;
基于直母线族偏差的大齿轮在机测量原理与技术研究