1.
Seawater Corrosion Resistance Property of 0Cr17Ni4Cu4Nb Martensite Precipitation Hardening Stainless Steel;
0Cr17Ni4Cu4Nb马氏体沉淀硬化不锈钢耐海水腐蚀性能研究
2.
Research and Developing of a New Kind of Cavitation Erosion Resistance Martensitic Precipitated Hardening Stainless Steel;
耐空泡腐蚀马氏体沉淀硬化不锈钢的研究与开发
3.
The Investigation of Casting Martensite Precipitation Hardening Stainless Steels Impeller Materials and Technics;
铸造马氏体沉淀硬化不锈钢叶轮材料及工艺的研究
4.
Effects of Aging Temperature on Performances of Martensite Precipitation Hardening Stainless Steel
时效温度对新型马氏体沉淀硬化不锈钢性能的影响
5.
17.4 ph stainless steel -- Is a martensitic precipitation/age hardening stainless steel offering high strength and hardness.
17.4 ph不锈钢--是一种经过沉降凝结／老化硬化处理的马氏体不锈钢,具有很高的硬度。
6.
Surface Hardening of Maraging 15-5PH Stell
15-5PH马氏体沉淀钢的表面强化
7.
Corrosion Resistance Evaluation of Precipitation Hardening Stainless Steel with Niobium
含铌沉淀硬化不锈钢的耐蚀性评估(英文)
8.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
9.
The Effect of Creep upon the Precipitation Behavior ofSuper 304H Austenitic Stainless Steel with Pre-Deformation
蠕变对预变形Super304H奥氏体不锈钢沉淀析出行为的影响
10.
Decreasing Chromium Precipitation in Austenitic Stainless Steel during the Ionitriding Process
降低奥氏体不锈钢离子氮化过程中铬的沉积
11.
Control of Al content in PH15-7Mo steel produced by ESR process
沉淀硬化PH15-7Mo不锈钢采用电渣重熔工艺时Al含量的控制研究
12.
Alloying Characteristics of Super-martensitic Stainless Steel for Hydroelectric Station
水电行业用超级马氏体不锈钢合金化特点
13.
Effect of Ti-concentration on the Microstructure and Hardness of 00Cr12Ni9Mo4Cu Maraging Stainless Steel;
Ti含量对00Cr12Ni9Mo4Cu马氏体时效不锈钢组织和硬度的影响
14.
Study on Mold Fluxes for Cr13 Martensitic Stainless Steel Billet;
Cr13马氏体不锈钢方坯保护渣的研究
15.
Research on Hot Deformation Process of 403Nb Heat-resistant Martensitic Stainless Steel
403Nb马氏体耐热不锈钢热加工工艺研究
16.
Conversion Relation of Leeb-hardness,Vickers-hardness and Strength of Austenitic Stainless Steels
奥氏体不锈钢里氏硬度、维氏硬度及强度之间的换算关系
17.
The Study on the Surface Hardness of Deep Multicomponent Complex Diffusion in ZG1Cr18Ni9 Austenite Stainless Steel;
ZG1Cr18Ni9奥氏体不锈钢深层多元复合渗表面硬化的研究
18.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究