1.
Gas-Assisted Etching of Micro-Hole Lattice Array on Lithium Niobate with Focused Ion Beam
用聚焦离子束气体辅助刻蚀在LiNbO_3上制备亚微米圆孔点阵
2.
gas discharge etching
气体放电蚀刻[法]
3.
Study of Dry Etching InP/InGaAs Based on Cl_2-based Gas
基于Cl_2基气体的InP/InGaAs干法刻蚀研究
4.
Large Size P-type Silicon Microchannel Plates Prepared by Photo-Electrochemical Etching
由光辅助电化学刻蚀制备大面积p型硅微通道板
5.
The Etching of Single Crystal 6H-SiC in Inductively Coupled SF_6/O_2 Plasma
6H-SiC体材料在SF_6/O_2混合气体中的ICP刻蚀
6.
auxiliary systems for gas centrifuge enrichment plants
用于气体离心浓缩装置的辅助系统
7.
Study of Unsymmetrical Structure's Gas Assisted Injection Molding;
不对称结构的气体辅助注射成型研究
8.
NEW TECHNOLOGY OF INJECTION MOLDING:GAS-ASSISTED INJECTION MOLDING;
注射成型新工艺:气体辅助注射成型
9.
OPTIMIZATION RESEARCH OF GAS-ASSISTED INJECTION MOLDING PROCESS PARAMETERS
气体辅助注射成型工艺参数优化研究
10.
Study on Gas Penetration during Gas-Assisted Injection Molding;
气体辅助注塑成型工艺中气体穿透的研究
11.
Study of Gas Penetration Behavior in Gas-Assisted Injection Molding
气体辅助注射成型气体穿透行为的研究
12.
Study of "Gas Fingering" Behavior in Gas-assisted Injection Molding;
气体辅助注射成型工艺中气指缺陷的研究
13.
Analysis of Formation Mechanism of Gas Bubble Blemish Inside the Gas Channel Wall for a Gas-assisted Injection Molding Part;
气体辅助注塑成型制品气道内壁质量的研究
14.
Study on the Key Techniques of Gas Channel Design in Gas-Assisted Injection Molding;
气体辅助注塑成型制品气道设计关键技术研究
15.
Outline of a New Software Package for Numerical Simulationof Cavity-filling of Gas-assisted Injection Molding;
气体辅助注射注气充填数值模拟软件的开发
16.
Experimental Study on Foam Formation on Gas Channel Wall in Gas-Assisted Injection Molded Parts
气体辅助注射成型制品气泡形成的实验研究
17.
auxiliary systems, equipment, components for use in gaseous diffusion enrichment
用于气体扩散法浓缩的辅助系统、设备、部件
18.
Application of Gas-assisted-injection Molding Technique in TV Cabinet Mould
气体辅助注塑成型技术在电视机模具中的应用