1.
The practice of baking start-up on 330kA aluminium electrolytic pot of Guangxi Investment Group
广西投资集团330kA铝电解槽焙烧启动实践
2.
Improving Insulation of Electric Tank Slot Cover to Eliminate Electricity Leakage of Slot Cover
改进铝电解槽槽罩绝缘性能,消除槽罩漏电
3.
Study on the Life of GL 190kA Prebaked Aluminum Reduction Cells;
GL190kA预焙铝电解槽槽寿命问题研究
4.
Spectral analysis of cell voltage fluctuation in 320 kA pre-baked aluminum reduction cells
320kA系列预焙铝电解槽槽电压波动的频谱解析
5.
In-depth Characteristics Extraction of Cell Voltage Fluctuation in Aluminum Reduction Cells
大型预焙铝电解槽槽电压波动特征提取
6.
Application of shut-off and restart-up technology when 306kA aluminium reduction cell with power
306kA铝电解槽不停电停、开槽技术的应用实践
7.
Design on the Current Oscilloscope for Anode Guide Rod in Aluminium Electrolytic Cell;
铝电解槽阳极导杆电流示波器的研制
8.
The Study of the Enlarge of Current in 160KA Cell;
160KA预焙铝电解槽强化电流试验研究
9.
Discussion on the technology of increasing the current of large prebaked cell
大型预焙铝电解槽强化电流技术探讨
10.
Design on Aluminum Electrolytic Cell at High Anodic Current Density
高阳极电流密度铝电解槽的设计思路
11.
Study on waste heat power generation technology with low-temperature gas
铝电解槽低温烟气余热发电技术探讨
12.
Research and Application on Real-time Monitoring Technology of the Freeze Profile of the Aluminum Reduction Cell;
铝电解槽槽膛内形在线监测的研究及应用
13.
Numerical Study on Thermal-Elasto-Plastic and Creep Deformation of Aluminum Electrolytic Cell;
铝电解槽槽壳热弹塑性及蠕变有限元计算
14.
Design of Web-based Temperature Monitoring System for Aluminum Reduction Cells
基于Web的铝电解槽槽壳温度监测系统设计
15.
Experimental Application of Pre-baked Slot Anode in 300 kA Aluminum Smelting Pot
预焙沟槽阳极在300kA铝电解槽上的试验与应用
16.
The Research of Fault Diagnosis System for 350kA Pre-baked Aluminum Reduction Cell;
350kA预焙铝电解槽故障诊断系统的研究
17.
The Simulation of the Flow Field of 300kA Large Scale Prebaked Aluminum Electrolysis Cell
300kA预焙阳极铝电解槽流场的仿真
18.
Study and development of technology for 400kA aluminium electrolysis cell
400kA铝电解槽技术研究与开发