1.
Failure of soldered joint during thermal fatigue test
微连接接头在热疲劳过程中的破坏规律
2.
Microstructural characterization of TC4/Cu/ZQSn10-2-3 diffusion bonded joints
TC4/Cu/ZQSn10-2-3扩散连接接头微观分析
3.
Microstructure and Properties of Vacuum Diffusion Bonded CLAM Steel Joint
真空扩散连接CLAM钢接头的微观组织与性能
4.
RECONNECT THE DOOR LOCK SWITCH CONNECTOR.
重新连接门锁开关接头。
5.
Engage electrical connector for cargo lamp.
连接载货灯的电气接头。
6.
WAS THE CONNECTOR COMPLETELY CONNECTED?
接头是否完全连接？
7.
RECONNECT THE BCM I/P 22-WAY CONNECTOR.
重新连接ＢＣＭ Ｉ／Ｐ２２－路接头。
8.
RECONNECT THE JUNCTION BLOCK 6-WAY CONNECTOR.
断开连接块６路接头。
9.
tools to tubing substitute
钻具连接油管的接头
10.
Engage fog lamp electrical connector.
连接雾灯电气接头。
11.
Connect fan electrical connector.
连接风扇电气接头。
12.
Connect all lamp wire harness connectors.
连接所有灯电线束接头。
13.
inlet connection
进气管(接头), 入口连接
14.
FROM THE TCM LINK CONNECTOR TO THE RELAY CONNECTOR
从ＴＣＭ连接接头到继电器接头。
15.
Effect of Bonding Temperature on the Microstructure and Properties of T91/12Cr2MoWVTiB Welded Joint
连接温度对T91/12Cr2MoWVTiB TLP连接接头组织和性能的影响
16.
Effect of Bonding Pressure on Transient Liquid Phase Bonding Process and Joint Properties of T91/12Cr2MoWVTiB
连接压力对TLP连接T91/12Cr2MoWVTiB过程及接头性能的影响
17.
double-studded flange
双头螺栓连接的法兰
18.
plug-and-jack type connector
插头-插孔式连接器