1.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
2.
Surface combined treatment of carbonitriding and B-C-N-RE multi-elements deep-penetrating on 20Cr steel firebrick die
碳氮共渗-深层稀土硼碳氮共渗复合处理在20Cr钢耐火砖模具中的应用
3.
RE-B-C-N multi-element penetration of 65Mn steel metal rubber with larger wire diameter
大丝径65Mn金属橡胶稀土硼碳氮共渗
4.
Effect of RE on Surface Layer Structure of Plasma Nitrocarbutized 42CrMo Steel
稀土对42CrMo钢等离子体氮碳共渗表层组织的影响
5.
RE-nitrocarburizing Technology for Piston Rod Made of 40CrMnMo
40CrMnMo活塞连杆稀土离子氮碳共渗工艺
6.
Study on Process and Microstructure Property of RE-boron-vanadizing for Carbon Steel;
碳钢硼钒稀土共渗工艺与组织性能研究
7.
Study on the Microstructure and Properties of Surface Layer of Low Temperature Plasma Re Nitrocarburized 17-4PH Steel
17-4PH钢低温等离子体稀土氮碳共渗层组织与性能研究
8.
Microstructure of RE-B-Al Diffusion Layer of Armco Iron and the Formation Mechanism of Borides
工业纯铁稀土硼铝共渗的渗层组织及硼化物的形成机理
9.
Study on Pulse Plasma RE Nitrocarburizing of Steel 17-4PH
17-4PH钢脉冲等离子体稀土氮碳共渗研究
10.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
11.
Effect of RE element on microstructure and properties of plasma nitrocarburized layer on 42CrMo steel
稀土对42CrMo钢等离子体氮碳共渗组织及性能的影响
12.
First-principle characterization on phases produced during RE nitrocarburizing of nanocrystallized 3J33 steel
纳米化3J33钢稀土氮碳共渗生成相第一性原理表征
13.
Microhardness of RE-boron-vanadizing layer decreases for the influence of ihrigizing,and its hardness gradient is less.
稀土硼钒共渗层显微硬度受渗入硅的影响而减小,同时硬度梯度也较小;
14.
The Study of Salt Bath Rare Earth (RE )--Boriding of 45 Steel at Low Temperature
45钢(α+γ)双相区温度盐浴稀土硼共渗的研究
15.
Effect of Rare Earths Content on Nitriding Performance of 38CrMoAl Steel
稀土含量对38CrMoAl钢渗氮层性能的影响
16.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
17.
Properties of Rare Earth Multi-elements Penetrated Layer on W4Mo3Cr4V High Speed Steel
W4Mo3Cr4V高速钢稀土多元共渗层的性能
18.
An Investigation of the Conventional HSS Cutting Performance by SOCNB Complex Permeation Treatment Method
硫氧碳氮硼复合共渗高速钢刀具切削性能的研究