1.
Application of Compensation to Corner Radius in Turning of Inside and Outside Diameter
刀尖圆弧半径补偿在内外径车削加工中的应用
2.
Application of Tool Corner Radius Compensation in NC Turning
刀尖圆弧半径补偿在数控车削中的应用
3.
Analysis of tool nose radius compensation in numerical control turning processing
数控车削加工中刀尖圆弧半径补偿分析
4.
Tool Nose Round (Corner) Radius Compensation and Tool Wear Compensation Based on FANUC 0iT NC System
基于FANUC 0iT系统刀尖圆弧半径补偿与刀具磨耗补偿
5.
The Analysis and Application of the Tool Radius Compensation in CNC Turning
数控车削加工中刀尖圆弧半径补偿的分析与应用
6.
Using Arc Radius Compensation for NC Machine Cutter to Repair Errors in Processing;
谈利用数控车刀具圆弧半径补偿弥补加工中的误差问题
7.
Error Analysis Caused of CNC Lathe Tool Nose Radius
数控车刀刀尖圆弧半径引起的误差分析
8.
The effects of tool nose curvature radus on the accuracy in numerical control lathe;
数控车中刀尖圆弧半径对车削精度的影响
9.
Cutting Tool Shape Radius Recompense Inaccuracy Analysis by Grinding Crucial Point CNC Turning Cutting Tools
数控车削刀具的刃磨引起的刀尖半径补偿的误差分析
10.
Analysis the reasons and methods of radius compensation in round turning tool.
分析了数控车床中圆头车刀刀具半径补偿的原因及方法。
11.
The cutting edge radius of the tools is minimized less than0.05μ m and the radius waviness of the tools is improved no more than0.2μ m.
刃磨出的金刚石刀具刃口半径值可以达到0.05μ以下，刀尖圆弧圈度提高到0.2μ以内。
12.
diameter of tip circular-arc center circle
齿尖圆弧中心圆直径
13.
diameter of tip circular-arc juncture circle
齿尖圆弧衔接点圆直径
14.
Research on Cutting Tool Radius Compensation in NC APT
数控自动编程中刀具半径补偿的研究
15.
The Research of Cutter Radius Compensation of Five-Axis CNC System;
五轴联动数控系统刀具半径补偿研究
16.
The Application of the Cutting Tool Radius Compensates in the CAM System;
刀具半径补偿在CAM系统中的应用
17.
The Analysis and Application of the CNC Milling Machine Tool Radius Compensation
数控铣床刀具半径补偿的分析与应用
18.
Application and Advert Proceeding of Cutting Tool Radius Compensatory Function
刀具半径补偿功能的应用及注意事项