1.
Lower Part of Classifier into Slurry Wear Bearing Device and Its Prevention
分级机下部支座装置进浆磨损及其预防
2.
Remove head restraint from the bucket seat.
从斗式座椅拆下头部保护装置。
3.
Lower engine with lifting fixture while aligning engine support insulator assembly into sill bracket assembly.
用提升装置降下引擎，同时将引擎支座绝缘体总成对正，放入横梁托架总成内。
4.
"Controllers may be supplied with painted steel floor mounting legs. For base mounting or stainless steel mounting legs, consult the Factory."
可提供配置涂漆钢地面安装支架的控制装置。如果需要底座安装或不锈钢安装支架,请工厂联系。
5.
This equipment is made up of kiln body, support device, supporting device with shelf, moving kiln head, sealing device for kiln tail, burning device and etc. parts.
该设备由筒体、承装置、档输支承装置、动装置、动窑头、尾密封装置、烧装置等部件组成。
6.
Terminal fittings transmit their force in bearing.
端部连接器将其力传到支撑装置上去。
7.
accessory drive pad
附件传动装置安装座
8.
skid-mounted pump unit
装在滑橇座上的泵装置
9.
Optimum design of support devices in large-scale columns (Ⅱ)
大型塔器支撑装置的优化设计(下)
10.
adequate and rigid support must be provided for long stem extension units.
对于长阀杆的延长装置,需要提供适当的和坚固的支撑座。
11.
Research on Test Device for Elastic Modulus E of Plain Elastomeric Bearings and Design on Superminiaturizational Experimental Device Combined Bending with Torsion;
板式橡胶支座力学性能E测试装置的研究及超小型化弯扭组合实验装置的研制
12.
A supporting device at or for the back of something else.
后支条在其它物体后部或为其它物体后部做支撑用的装置
13.
mounting (incl. those with aiming and loading mechanisms) for firearms
火器用的座架（包括装有瞄准和装弹装置的座架
14.
Analysis on the Current Situation of Installing and Using Protecting Devices at the Back Bottom of Automobiles and Trailers
汽车和挂车后下部防护装置安装使用现状分析
15.
"The leveller consists of straightener, tension rolls and driving device, basement and speedy roll change device. "
拉伸弯曲矫直机由矫直机、张力辊及其传动装置、底座和快速换辊装置部分组成。
16.
Workers went as much as78 feet underwater to dig the supports for the Brooklyn Bridge.
工人必须到河水下方78英尺的地方，设置支撑布鲁克林桥的装置。
17.
Put a support under it.
在它下面放个支座。
18.
seat with integral seat belt anchorages
设有原装安全带固定装置的座位