说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> BOF-LF-RH-CC工艺
1.
Behavior and Control of Nitrogen in Structural Steels Steelmaking by 100 t BOF-LF-RH-CC Process
100 t BOF-LF-RH-CC工艺冶炼结构钢时钢中氮的行为及控制
2.
Study on Key Technology of 38CrMoAl Steel Produced by BOF-LF-RH-CC Process
BOF-LF-RH-CC流程生产38CrMoAl钢关键技术研究
3.
Processing and Metallurgical Quality of Bearing Steel GCr15 Produced by 120 t Converter-LF-RH-CC Flow Sheet
120t转炉-LF-RH-CC流程生产GCr15轴承钢的工艺和冶金质量
4.
Analysis of Different Technological Processes on the Clean Degree of Ultra-low Carbon Steel
BOF-RH-CC生产超低碳钢板坯洁净度研究
5.
Production of Low Oxygen Content GCr15 Bearing Steel by the Process of 60 t LD-LF-VD-CC
60t LD-LF-VD-CC工艺生产低氧GCr15轴承钢
6.
Analysis of Production Influencing Factor and Process Optimization of BOF-RH-CSP Process
BOF-RH-CSP单联工艺生产影响因素及优化浅析
7.
Practice of DQ steel production by HMPT-BOF-RH-CSP single-link process at Lianyuan Steel
涟钢HMPT-BOF-RH-CSP单联法生产DQ级钢工艺实践
8.
Comparison of Cleanliness of Pipeline Steel Refining by RH-LF and LF-VD Process
RH-LF和LF-VD工艺生产管线钢洁净度的比较
9.
Process Practice of Gear Steel 20CrMnTiH Production with 70 t LD-LF-CC Flow Sheet at Chengde Jianlong Steel
承德建龙70tLD-LF-CC流程生产20CrMnTiH齿轮钢的工艺实践
10.
Process Practice for Spring Steel 65Mn Produced by 80t Combined Blown Converter-LF-CC Flow Sheet
80t复吹转炉-LF-CC流程生产65Mn弹簧钢的工艺实践
11.
Effect of Metal Pretreatment-80 t LD-RH-LF-CC Process Flow on Inclusion in Pipeline Steel
铁水预处理-80 t LD-RH-LF-CC生产流程对管线钢夹杂物的影响
12.
Analysis about Sulfur Controlling and Back-sulfur of Low-sulfur Steel by HMPT-BOF Process
HMPT-BOF工艺生产低硫钢的硫控制与回硫分析
13.
Study of Inclusions in EAF-LF/VD-HCC;
EAF-LF/VD-HCC工艺夹杂物行为研究
14.
Smelt Technical Practice of 40t EBT and LF
40t EBT+LF冶炼改造工艺实践
15.
Cold modeling experiment of 100 t LF bottom blowing process optimization and its application
100t LF底吹工艺优化冷态模拟及应用
16.
Decarburization Model and Improvement of RH-MFB Process;
RH-MFB脱碳过程模型与工艺优化
17.
Process optimization for production of ultra-low carbon steel by RH-MFB
RH-MFB生产超低碳钢的工艺优化
18.
Study on S34MnV cleanliness during the process of crank steel produced by the EAF-LF(VD)-VT
EAF-LF(VD)-VT工艺生产曲拐用钢S34MnV的洁净度研究