1.
RECTANGLE JET TRAY──MATHEMATICAL MODEL OF MULTI-CAP UNIT PLATE EFFICIENCY
矩形喷射塔板研究──多罩体单元板效率的数学模型
2.
The Study on Structures and Performances of the Jet-Type Solid Series Mass-Transfer Tray;
喷射型立体连续传质塔板的结构及性能研究
3.
Experimental Study on Desulfurization and Nitrification in Spray Scrubber;
筛板式喷淋塔脱硫脱硝性能试验研究
4.
COMPARISON OF DESULFURIZATION PERFORMANCE BETWEEN CONVENTIONAL AND NOVEL JET BUBBLE REACTOR WITH PIERCED CYLINDRICAL GAS INLET DEVICE
新型喷射鼓泡塔与传统鼓泡塔脱硫的性能比较
5.
Beam type gas injection packing support plate
梁型气体喷射式填料支承板、梁型气体喷射式填料支承板施工图
6.
By the addition of an umbrella-shaped baffle above the feed sprayer in the column, the liquid entrainment from the column can be diminished.
在精馏塔进料喷头上方增设伞形档板，可以减少精馏塔带液量。
7.
Application of the Technology of Spraying Concrete to Remaking and Reinforcing Coal - towers;
喷射混凝土技术在煤塔改造加固中的应用
8.
Compound burning technology in chain grate boiler with suspension burning of wood dust
人造板厂链条式锅炉喷射砂光粉复合燃烧技术
9.
Experimental study on the combustion and flow process in a scramjet with strut injector
超燃冲压发动机支板喷射燃料的燃烧过程试验
10.
Experimental Study on Pressure Drop Characteristics in a WFGD Sieve Tray Spray Scrubber
湿法烟气脱硫筛板式喷淋塔阻力特性的试验研究
11.
The Study About Appliance and Technology of Cannon Rotary-atomizing Long-shot Air-assisted Spraying;
炮塔式离心雾化风送远射程喷雾技术及机具有研究设计
12.
Numerical Simulation of Liquid-column Spray Tower with Different Gas Inlets
进气方式对液柱喷射试验塔内部流场的数值模拟
13.
The speedy cooled strip is equalized here to the temperature accepted by zinc pot.
使经快速喷射冷却的钢板温度均匀一致,达到钢板入锌锅的温度。
14.
Study on the Tensile Deformation and Fracture Behavior of Spray Deposition 7075Al/SiC_p Composites Sheet at Elevated Temperature;
喷射沉积7075Al/SiC_p复合材料板高温拉伸变形与断裂行为研究
15.
Large Eddy Simulation of Flow Around a Strut and Ejection Flow from a Strut Base in Combustor of Scramjet;
超燃冲压发动机燃烧室支板绕流及喷射流场大涡模拟
16.
Investigation of Hot Work Process, Microstructure and Mechanical Properties of Multi-layer Spray Deposition SiC_p/FVS0611 Composite Sheet;
喷射沉积SiC_p/FVS0611复合材料板材热加工及组织性能的研究
17.
Microstructure and Mechanical Properties of Spray Deposition SiCp/2024 Al Matrix Composite Rolling Plate
喷射共沉积SiC_p/2024铝基复合材料轧板的显微组织及力学性能
18.
Microstructures and Tensile Fracture Characteristics of Spray Deposited Al-Zn-Mg-Cu Alloy Hot-Rolled Plates
喷射成形Al-Zn-Mg-Cu合金热轧板材的显微组织及拉伸断口分析