1.
A simulation study of the effect of polymer flooding sewage characteristics on hydrocylone's separation efficiency
聚驱污水特性对旋流器分离效率影响的研究
2.
Study on AOPs Oxidation Treatment of Produced Water from Polymer Flooding;
AOPs氧化处理聚合物驱采油污水的研究
3.
Study on Oil/Water Separation for Produced Liquid and Oily Water of Polymer Flooding;
聚合物驱采出液和含油污水的油水分离研究
4.
Study of the Separation of Produced Liquid and Oil in Back Water after the Polymer Flooding;
聚合物驱采出液和含油污水油水分离研究
5.
Aiming at the problem of produced water drainage of oil fields, this paper performs a study on displacement with polymer solution diluted with produced water.
针对油田采出污水外排的问题,开展了污水稀释聚合物驱油研究。
6.
INFLUENCES OF EMULSIFYING ACTIVE SUBSTANCES ON TREATMENT OF POLYMER-FLOODING PRODUCED WATER
聚合物驱采油污水中乳化活性物质对污水处理的影响
7.
Study on Advanced Purification Technology for Oil Recovery Wastewater from Polymer Flooding
聚合物驱采油污水深度净化技术的研究
8.
Study on the Emulsion Stability of Polymer-flooding Wastewater;
聚合物驱含油污水乳状液的稳定性研究
9.
Treatment of Oily Wastewater Produced in Polymer Flooding Using Compound Agents and Combined Process;
油田聚合物驱采油污水处理药剂及工艺研究
10.
EXPERIMENTAL RESEARCH ON ACTIVE ALKALI-POLYMER COMBINATION FLOODING SYSTEM WITH PRODUCED WATER
污水配制活性碱/聚二元复合驱体系实验研究
11.
Technical Research and Application of Sewage Water Desulfurization and Viscosifying in Polymer Flooding
聚合物驱污水除硫增粘技术的研究及应用
12.
STUDY ON THE DEGRADATION EFFECT OF BACTERIA ON PARTIALLY HYDROLYZED POLYACRYLAMIDE IN THE OIL RECOVERY SEWAGE BY POLYMER FLOODING
细菌对注聚驱采油污水中部分水解聚丙烯酰胺降解作用研究
13.
Study on the Stabilization Mechanism and Oil/Water Separation Chemicals of Polymer Flooding Produced Oily Water;
聚合物驱含油污水油水乳状液稳定机理及油水分离化学剂研究
14.
Flocculation Mechanism of Dithiocarbamate and Performance in Treating Produced Water from Polymer Flooding
二硫代氨基甲酸盐的絮凝机理及对聚合物驱采油污水的处理性能
15.
polymer augmented waterflood
聚合物加强注水驱油
16.
The Studies on Production Targets Prediction of Subsequent Water Flooding of Polymer Flooding;
聚驱后续水驱开采指标预测方法研究
17.
Study on the Mechanism of the Demulsifiers on Water and Polymer Flooding Emulsion;
水驱、聚驱乳状液破乳剂作用机理研究
18.
Establishment and Verification of the Displacement Performance Model in the Follow-Up Water Drive Phase after Polymer-Flooding
聚驱后续水驱阶段驱替特征模型的建立及验证