1.
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
2.
Brazability of SiC Particulate Reinforced Aluminium Metal Matrix Composites
SiC颗粒增强铝基复合材料的钎焊性
3.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
4.
Study on preparation and characteristic of low melting-point Aluminum base composite filler metal
低熔点铝基复合钎料的制备及其性能研究
5.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
6.
A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler Alloy
Ag-Ti_4活性钎料钎焊AlN与W-Cu合金研究
7.
Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing
Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响
8.
Wettability and microstructure of multicomponent Cu-based active filler metal on c-BN
多元铜基活性钎料对c-BN的润湿性与微观组织
9.
Characteristics Study on Laser Welding-Brazing of Aluminum/Titanium Dissimilar Materials;
铝/钛异种材料激光熔钎焊特性研究
10.
Corrosion resistance of intermediate temperature filler metal for stepped welding to 6063 aluminum alloy
6063铝合金阶梯焊中温钎料腐蚀性能
11.
Microstructure and properties of BCu80Ni5SnTi active filler metal for brazing cubic boron nitride
钎焊立方氮化硼BCu80Ni5SnTi活性钎料的组织与性能
12.
Study on Preparation and Brazing Diamond Film of Active Coated Brazing Filler Metal;
活性涂层钎料的制备及其钎焊金刚石膜的研究
13.
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
14.
Microstructure and Mechanical Property of Joint by Amorphous Fillers
非晶镍基钎料钎焊接头性能及微观组织的研究
15.
The Preparation and Research of the Al-Si-Cu-Sn-Zn Multi-Aluminum Solder
Al-Si-Cu-Sn-Zn多元铝基钎料的制备与研究
16.
INTERFACIAL STRUCTURE AND MECHANICAL PROPERTIES OF ALUMINIUM FOAM JOINTS FLUXLESS-SOLDERED WITH Zn-Al-Cu BASE ALLOY
Zn-Al-Cu基合金无钎剂钎焊泡沫铝的界面结构及力学性能
17.
Wetting Research between Al_2O_395 Ceramic and Active Brazing Alloy Containing Al_2O_3;
含Al_2O_3活性钎料与Al_2O_395陶瓷的润湿研究
18.
Composition design and optimization of Cu-Ni-Sn-Ti active filler metal
Cu-Ni-Sn-Ti活性钎料成分设计与优化