1.
The yield point represents the dividing line or transition from the elastic to the plastic region of the curve.
屈服点是弹性变形区域到塑性变形区域之间曲线的过渡点。
2.
3-D Finite Element Analysis of Strain Distribution and Plastic Deformation Zone in Equal Channel Angular Extrusion of Cylinder Workpiece
圆形工件等通道转角挤压应变分布和塑性变形区的三维有限元分析
3.
distortion energy plasticity condition
形状变形能塑性条件
4.
Plastic deformation concentrates at the ferrite area under the tensile stresses.
在拉应力作用下,塑性变形集中在铁素体区.
5.
The Impact of the Outer Region on the Plastic Deformation Force of Metals and Its Essence
外区对金属塑性变形力的影响及其实质
6.
element of mechanics of plasticity
塑性变形的力学原理
7.
extrusion stress
(塑性变形的)挤压应力
8.
DEFORMATION BEHAVIOR OF SPRAY-DEPOSITED La-BASED BULK AMORPHOUS ALLOY IN SUPERCOOLED LIQUID REGION
喷射成形大尺寸镧基块体非晶过冷液相区内的塑性变形行为
9.
MEASURING PLASTIC DEFORMATION ON A METAL SURFACE AND DETERMINING THE ELASTO-PLASTIC BOUNDARY FROM THE CHANGE OF LASER-PRODUCED DIFFRACTION PATTERNS
利用激光衍射谱的变化测量金属表面的塑性变形并确定其弹塑性区交界
10.
It is assumed that plastic deformation stems from the localization of shear strain.
岩样的塑性变形假设根源于塑性应变局部化。
11.
The plastic deformation on ribs caused by punch push down and skin springback.
筋条的塑性变形既有凸模下压导致的塑性变形,又有蒙皮回弹导致的塑性变形;
12.
Thermoplastic Deformation Behavior and Microstructure Evolvement of TA15 Titanium Alloy;
TA15钛合金热塑性变形行为与组织演变
13.
Palstic Deformation Mechanism and Microstructure Evolution of Nanocrystalline Nickel;
纳米金属镍的塑性变形及微结构演变
14.
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
15.
Large Deformation Elastic-Plastic Analysis of Soil Stability by Finite Flement Method;
土体稳定性弹塑性大变形有限元分析
16.
Twinning Deformation and Plasticity and Toughness of α-Titanium Alloys;
α钛的孪生变形及其塑性韧性的研究
17.
Fem Analysis of Elasto-Plastic Large Deformation on Slope Stability;
边坡稳定性弹塑性大变形有限元分析
18.
A method to improve seal property by plastic deformation;
一种用塑性变形改善密封性能的方法