1.
Model and Properties of Isothermal Gelling Process for Thixotropic Waxy Crude Oil
触变性含蜡原油等温胶凝过程特性及模型研究
2.
3D Non-isothermal Numerical Simulation of Automatic Pressure Gel Technology Molding Process
自动压力凝胶工艺充模过程的三维非等温数值模拟
3.
Influence of activation on Hydration Activity steel slag
高温重构过程对钢渣胶凝性能的影响
4.
Phase-field Simulation of Isothermal Solidification of Fe-C-P Ternary Alloy;
Fe-C-P三元合金等温凝固过程相场法模拟
5.
The Simulation of Isothermal Solidification for Al-Cu Binary Alloy Based on KKS Model;
基于KKS模型Al-Cu合金等温凝固过程相场法模拟
6.
Phase-field Simulation of the Ternary Alloys in the Process of Non-isothermal Solidification;
三元合金非等温凝固过程的相场法模拟
7.
Phase-field Simulation of Influence of Solute Gradient to Process of Non-Isothermal Solidification
溶质梯度影响非等温凝固过程的相场法模拟
8.
Phase-Field Simulation of Isothermal Solidification in Binary Alloy with Forced Convection
对流下二元合金等温凝固过程的相场模拟
9.
Low Temperature Plasma Treatment for the PEGDA-Based Hydrogels
组织工程用PEGDA水凝胶材料低温等离子体接枝聚合
10.
Application of Gel-Casting Technique in the Development of Intermediate Temperature Solid Oxide Fuel Cells;
凝胶注模工艺在中温固体氧化物燃料电池制备过程中的应用研究
11.
The preparation of aerogels includes the sol-gel process and supercritical drying.
气凝胶一般由两步法制得，即经过溶胶－凝胶过程和超临界干燥过程。
12.
However, the hydration degree of binder, as well as the adiabatic temperature rise for high strength concrete, will be obviously decreased due to the increase of initial casting temperature.
但却会明显降低高强度等级混凝土所用胶凝材料的水化程度,使其绝热温升值下降。
13.
A process taking place at constant temperature is said to be isothermal.
温度恒定时发生的过程叫做等温过程。
14.
Concrete solidification temperature changes in the process of analysis
大体积混凝土凝固过程中的温度控制
15.
Brittleness of CRC of Equal Strength at Low Temperature
低温下等强橡胶集料混凝土的脆性初探
16.
THERMAL DECOMPOSITION AND CRYSTALLIZATION PROCESS OF ZnO:Al THIN FILMS VIA SOL-GEL ROUTE
溶胶-凝胶法制备ZnO:Al薄膜的热分解及晶化过程
17.
Research on sol-gel process for lanthanum and cobalt oxides synthesis
镧钴氧化物合成的溶胶凝胶形成过程分析
18.
the separation of liquid from a gel that is caused by contraction (as in cheese making).
由于收缩使液体从凝胶体渗出的过程。