1.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
2.
aperture atomizer
喷孔式喷油嘴喷雾器
3.
Technical specification for fuel injection nozzles of diesel engines
GB/T5772-1986柴油机喷油嘴偶件技术条件
4.
Measures to extend life of mate of jet in diesel engine
延长柴油机喷油嘴偶件使用寿命的措施
5.
Effect of Nozzle Parameters on Diesel Engine for Meeting Stage Ⅲ Emission Regulation
喷油嘴偶件结构参数对国Ⅲ柴油机排放的影响
6.
A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle
柴油机喷油嘴喷孔中空泡形成过程的数值模拟
7.
A perforated nozzle for spraying water from a hose or sprinkling can.
莲蓬式喷嘴一种使水从管子或喷水壶里喷洒出来的有孔的喷嘴
8.
The operation principle of a automatic flow-rate detecting system of fuel injector is introduced and the design of hardware and software is presented.
介绍了喷油嘴四喷孔流量自动检测系统的工作原理，给出了系统硬件和软件设计。
9.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
10.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
11.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
12.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
13.
To pass through pores or interstices in the manner of perspiration.
渗漏用出汗的方式通过毛孔或缝隙
14.
A throttle is the part that controls the amount of gasoline injected by nozzles.
节汽门是一个能控制喷油嘴入喷油量的零件。
15.
Technical specification for delivery valves of fuel injection pumps of diesel engines
GB/T5771-1986柴油机喷油泵出油阀偶件技术条件
16.
diameter and number of hole
喷嘴量孔孔径及数目
17.
Technical specification of fuel injection pump plunger and barrel assembly for diesel engines
GB/T5264-1985柴油机喷油泵柱塞偶件技术条件
18.
The Aaffecting Factor's Sensibibity Analysis of The Fracture-Porosity Reservoir Production Capacity After Shooting
裂缝孔隙性油藏射孔完井产能影响的单因素敏感分析