1.
Surface Network Cracks in Low Carbon Boron Steel Casting
低碳硼合金钢表面网状裂纹成因分析
2.
ANALYSIS ABOUT NET-SHAPE CRACKS ON THE SURFACE OF A350 LF6 CONTINUOUS CASTING BILLET
A350 LF6连铸坯表面网状裂纹分析
3.
To cause(china, for example) to become covered with a network of fine cracks.
使（瓷器等）表面出现网状的细裂纹
4.
glazed china with a network of fine cracks on the surface.
表面有网状裂纹的光滑的瓷器。
5.
A network of fine cracks on the surface of glazed pottery, china, or glassware.
裂纹上釉的陶器、瓷器或玻璃制品表面上的网状细裂纹
6.
Close study of the surface of the picture shows up a network of fine cracks.
仔细察看画面，就会发现网状的细裂纹。
7.
Investigation on Surface Star-Like Crack of Q460C Billets
Q460C钢表面星状裂纹产生原因探析
8.
develop a fine network of cracks.
形成一个网状的裂纹。
9.
A Superposition Finite Element Mesh Method(s-FEM) and Its Application to Two Identical Coplanar Three-dimensional Surface Cracks
基于有限元重合网格法的等大共面的三维表面裂纹交互因子研究
10.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
11.
Application of Steel Balls' Surface Crack Detection Based on Digital Signal Processing and Neural Net
数字信号处理与神经网络在钢球表面裂纹检测中的应用
12.
Opening-closing state analysis on rail surface cracks under rolling-contact loading
滚动接触载荷作用下的铁轨表面裂纹开合状态分析
13.
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
14.
to become, or to cause to become, covered with a network of small cracks; The blazing sun crackled the desert sand.
变得或引起覆盖上网状的小裂纹。
15.
Cracks grow in directions nearly parrallel to the surface.
裂纹在近乎平行于表面的方向上生长。
16.
A core was removed from this area so that the crack surfaces could be examined.
从这一区域取样芯，以便检验裂纹表面。
17.
BEM Analysis of Transient Response in Surface Crack Problems
表面裂纹问题瞬态响应的边界元分析
18.
The Remaining Strength Assessment of Pipeline Containing 360°Cir- cumferential Surface Crack,
含360°表面裂纹管道剩余强度评价