1.
Improvement of chucking method and part axle of 3MZ3210 super lapping machine
3MZ3210超精研机夹紧方式及工件轴的改进
2.
The trait of the technics technique and equipment consists in the principal axis of grinding head and the axes of workpiece perpendicular disposal.
本工艺和设备的突出特点在于磨头主轴与工件轴线呈垂直布置。
3.
Driving plate propelled by3 floating gydraulic cylinder to stab to the end of wordpiece and made the workpiece rotate.
当工件端面与工件轴线不垂直在5°内进均能保证正常工作。
4.
Driving plate propelled by 3 floating gydraulic cylinder to stab to the end of wordpiece and made the workpiece rotate.
当工件端面与工件轴线不垂直在5°以内进均能保证正常工作。
5.
Shaft Assembly (Male, female, washer, grease….
轴组件（轴，轴套，轴承，油脂。。。）
6.
Typical parts--Shaft CNC Turning Processs
典型零件—轴类工件的数控车削加工工艺
7.
Guide for installation technology of embedded components of axial turbine
轴流式水轮机埋件安装工艺导则
8.
The Research on Thermal Characteristics of Spindle Components in Milling Center;
铣削加工中心主轴组件热特性的研究
9.
Axis Class Forging Heat Treatment Craft Simulation and Experimental Study;
轴类锻件热处理工艺模拟及试验研究
10.
Analysis of ball bearing performance with general speed;
一般速度条件下球轴承工作特性分析
11.
Heat craftsmanship of mud pump large-sized crankshaft 40 MnB;
泥浆泵40MnB大曲轴铸件的热工艺改进
12.
Design of Timed Quenching Process for 42CrMo4 Steel Shaft
42CrMo4钢轴类件控时淬火冷却工艺的设计
13.
The New Forging Process of Medium and Small-sized Crankshaft
中、小曲轴精锻件锻造新工艺的探讨
14.
The Development of the On-line Straightness Detection System for Shafts
轴类工件直线度在线检测系统的开发
15.
Method of Selecting Whetstone for Superfinishing of Bearing Parts
轴承零件超精加工中油石的选用方法
16.
Manufacture Process Optimization of C45 Screw Shaft Forgings with Great Section
大截面C45艉轴锻件制造工艺优化
17.
Modeling and Analysis of Cutting Force for Turn-Milling Non-Axisymmetric Workpiece;
非轴对称工件车铣加工的切削力建模与分析
18.
Development of CAD System on Camshaft Mold and Foundry Tools Design;
凸轮轴铸件铸造工艺工装CAD系统的开发