1.
Evaluation of Adhesion Strength of High-Strength Coating by Symmetrical-Incision Tensile Testing and Analysis of Its Plane Stress bv Finite Element Method
对称切口拉伸法评价高强度涂层及平面应力有限元分析
2.
NOTCHED TENSILE PROPERTY OF SHORT GLASS FIBER REINFORCED PA6
短切玻纤增强尼龙6的缺口拉伸性能
3.
Design of Progressive Die with Side Notching and Horizontal Blanking for Drawing Part
侧冲缺口-横向冲切落料拉伸级进模
4.
testing methods for strength properties of adhesives for wood in shear by tension loading
胶粘剂拉伸剪切强度测定方法 (木材对木材)
5.
A Comparative Study of Laminated Piezobeam with Extension and Shear Actuation;
拉伸致动和剪切致动压电层合梁的对比研究
6.
AE Feature Analysis on Tensile Fracture for Plate Specimens with Pre-Cracked V Cut
V型切口板材试件拉伸断裂过程中的声发射特征
7.
Effect of specimen geometry on tensile fracture of notch specimen of pure aluminum
纯铝试样厚度与缺口深度对拉伸破坏的影响
8.
Effect Analysis of Cutting Time on Drawing Process
工艺切口时间对拉延成形的影响分析
9.
The axial-symmetric ring-shaped interface crack problems are discussed under tension loading.
讨论受拉伸载荷作用的轴对称环形片状界面裂纹问题。
10.
The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
GB/T7124-1986胶粘剂拉伸剪切强度测定方法(金属对金属)
11.
Test method of creep properties of adhesive in shear by tension loading (metal to metal)
GB/T7750-1987胶粘剂拉伸剪切蠕变性能试验方法(金属对金属)
12.
Influence of amino silane coupling agent on lap shear deformation of adhesioned aluminum sheet/polypropylene
氨基硅烷偶联剂对铝板/聚丙烯粘接件拉伸剪切变形的影响
13.
DTY Draw texturing yarn
拉伸变形丝（也称为涤纶低弹丝）
14.
testing methods for shear strength of adhesive bonds by tensile loading
用拉伸负荷测定粘合剂剪切强度
15.
Design of Blanking-Drawing-Trimming Compound Die for the Water-Containing Plate
接水盘落料-拉伸-切边复合模设计
16.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
17.
Research on the tensile property for two methods of cutting TC1 titanium alloy sheet
两种切割方法的TC1板材拉伸性能研究
18.
THE FINITE STRAIN ANALYSIS OF THE STRETCHING GRAVEL AND OOIDE OF DUCTILE NAPPE SHEAR ZONE IN SOUTHERN LIAONING
辽东半岛南部韧性推覆剪切带拉伸砾石、拉伸鲕粒的有限应变分析