1.
Microitructure and Friction and Wear Behavior of Nanostructured Chromium Oxide Coatings Deposited by Plasma Spraying with Axial Powder Feeding
轴向送粉等离子喷涂纳米氧化铬涂层的结构与性能
2.
Study on the Technology of Induction Melting and Casting with Direct Feeding Powder
直接送粉在轴表面感应熔铸合金层的工艺研究
3.
a rotating shaft that transmits power from the engine to the point of application.
从发动机向应用点传送力量的转轴。
4.
Study on the Coupling of Laser Beam and Powder and High-level Accumulate Technology Based on Inside-laser Coaxial Powder Feeding
基于光内同轴送粉光粉耦合及高层成形技术的研究
5.
Numerical Simulation and Improvement of the Axial Classifier;
轴向型粗粉分离器的数值模拟及改进
6.
Numerical Simulation of Effect of Batch Transportation on Axial Temperature Drop
顺序输送对管道轴向温降影响的数值模拟
7.
The Influence of Inside-Laser Coaxial Powder Feeding Technology Parameter on Forming under the Action of Annular Facula;
环形激光作用下同轴送粉熔覆工艺参数对成形的影响
8.
Primary Study of Lean Parts on Inside-Laser Coaxial Powder Feeding Device and Process of Laser Cladding Rapid Prototyping;
激光熔覆快速成形光内同轴送粉斜壁堆积的初步研究
9.
Research on the Laser Cladding Inclined Wall Accumulation Based on the Internal Laser Coaxial-powder Feeding Technology
基于光内同轴送粉技术的激光熔覆斜壁堆积成形研究
10.
Axial lead cores made of magnetic oxides or iron powder
GB/T12798-1991磁性氧化物或铁粉制成的轴向引线磁芯
11.
Application and Benefit Analysis of Axial Double-Baffle Classifier Installed in Supercritical Generating Unit
轴向型双挡板煤粉分离器的应用及效益分析
12.
Experimental Studies on the Modal (R,1) Type Ultrasonic Powder-feeding Device;
径向伸缩模态超声波粉体输送装置的试验研究
13.
conveyer screw shaft coupling
输送机螺旋轴联轴节
14.
an oscillating lever connected to an engine piston rod and used to transmit power to the crankshaft.
可摆动的杠杆,与引擎之活塞相连,用以向机轴传送能量。
15.
pivot-bucket conveyor-elevator
枢轴吊斗提升输送机
16.
angle type axial piston motor
斜轴式轴向活塞马达
17.
combined radial-axial bearing
混合式径向-轴式轴承
18.
An intermediate shaft between the powered and driven shafts in a belt drive.
副轴，天轴传送带上介于动力轴与驱动轴之间的中间轴