1.
Pore and Permeation of Composite of Stainless Steel Powders and Silkscreen
不锈钢粉末与丝网复合的孔隙和透过性能
2.
OPPORTUNITIES AND CHALLENGES OF PM STAINLESS STEEL AUTOMOTIVE PARTS
粉末冶金不锈钢汽车零件的机遇与挑战
3.
Research on the Injection Molding Process of 316L Stainless Steel Powder and Titanium Powder
316L不锈钢粉末和Ti粉末的注射成型工艺研究
4.
On Warm Compaction Technology of 316L Stainless Steel Powder;
316L不锈钢粉末温压技术的研究
5.
Analysis of the morphology of 316L stainless part formed by selective laser melting
选区激光熔化316L不锈钢粉末形貌分析
6.
Preparation and Performance of Ce-Pt-Pd/Stainless Steel Wire Meshes Catalyst
Ce-Pt-Pd/不锈钢丝网催化剂的制备与催化性能
7.
Study on the Reaction Joint and the Structure Property of Laser-indueced Ni-Al Powder Materials and Stainless Steel;
激光诱导Ni-Al粉末材料与不锈钢的反应连接及组织与性能研究
8.
PILOT PLANT TEST OF REMOVING CATALYST FINES FROM FCC SLURRY WITH SINTERED STAINLESS STEEL FILTER CORE
不锈钢粉末烧结滤芯脱除FCC油浆中催化剂粉末中试研究
9.
Study on Powder Injection Molding for 316L Stainless Steel and ZTA Ceramics;
316L不锈钢及ZTA陶瓷粉末注射成形技术的研究
10.
Effects of Sintering Atmosphere on Sintered Properties of Stainless Steel Powders;
烧结气氛对不锈钢粉末烧结性能的影响
11.
Characterization of 316 L stainless steel powders produced by supersonic gas atomization
超音速气雾化制备316L不锈钢粉末的表征
12.
Influence of Sintering Parameters on Performance of Powder Metallurgy Cr13 Stainless Steel
烧结参数对粉末冶金Cr13型不锈钢性能的影响
13.
There were no significant differences of frictional resistance between 0.020 inch stainless steel round wire and 0.019× 0.025 inch stainless steel rectangular wire.
0.020英寸不锈钢圆丝与0.019×0.025英寸不锈钢方丝之间无显著差异。
14.
stainless steel wire wrapped scree
不锈钢钢丝绕制筛管
15.
Stainless steel wire ropes
GB/T9944-1988不锈钢丝绳
16.
Pd-Y/Stainless Steel Wire Mesh Catalyst for Combustion of Volatile Organic Compounds
VOCs催化燃烧Pd-Y/不锈钢丝网催化剂的性能
17.
The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。
18.
Study on the Process of Fabricating Fine Stainless Steel Powder by Gas and Solid Dual-phase Atomization;
固气两相流雾化制备微细不锈钢粉末工艺的研究