1.
Improvement of the Coil Shape After Themodernisation of WISCO 1700mm Hot Strip Mill
武钢1700热轧线改造对于卷形的改善分析
2.
Application of mid-thin slab continuous casting and continuous rolling technology in 1700mm hot strip rolling line of Anshan Iron and Steel Company
中薄板坯连铸连轧工艺在鞍钢1700热轧线中的应用
3.
SUMMARIZE ABOUT SEQUENCE CONTROL AT FURNACE OF AISC 1700 HOT STRIP MILL PLANT
鞍钢1700热连轧炉区顺序控制概述
4.
A VIBRATION FAULT DIAGNOSIS FOR THE REDUCER OF 1700 HOT CONTINUOUS MILL IN ANSHAN IRON AND STEEL COMPANY
鞍钢1700热连轧机减速机的振动故障诊断
5.
The Study to Improve the Prediction of the Rolling Load in the Finishing Train of 1700 Hot Strip Mill of the Wuhan Iron&Steel Co.;
提高武钢1700热连轧机压力预报精度的研究
6.
ON TECHNOLOGICAL REMAKING AND DEVELOPMENT OF HYDRAULIC PRESS DOWN SYSTEM OF 1700 TYPE HOT - ROLLING PLANISHER;
1700热轧平整机液压压下系统的技术改造与开发
7.
A Study and Test for Driving System of the 1700 Hot-rolling Mills in Wuhan lron and Steel Co.--Analysis on the Causes of Gear Spindal Heavy Damage
武钢1700热连轧机主传动系统测试研究——弧齿接手齿面严重损坏的原因分析
8.
Experiment-rolling Pipeline Steel X60 in 2300 mm Hot-rolling Line of Benxi Iron & Steel(Group) Co.,Ltd.
本钢2300mm热轧机组试轧X60管线钢
9.
Optimization of the Hot Rolling Process for Narrow Strip Steel
热轧窄带钢生产线轧制工艺改造综述
10.
Fracture Control of the Accumulater on the 1700 Bloomer of Anshan Iron and Steel Complex
鞍钢1700初轧机蓄势器的断裂控制
11.
Analysing and handling the twist of press down reducer of 1700 continuous finishing mill under load
1700连轧机精轧压下减速机扭动的分析与处理
12.
The Structure Analysis of CVC Hydraulic Balancing Block,Hot Strip of BX STEEL,1700 Mill And 2300 Mill
本钢1700轧机与2300轧机CVC液压平衡块结构分析
13.
Application of coil box in Qian'an Iron & Steel Co.2250 HSM
热卷箱在迁钢2250热轧生产线的应用
14.
Research on the Equipment Installation Technology Optimization of Large Scale Hot Mill Continuous Rolling Line
大型热连轧轧钢生产线设备安装工艺优化研究
15.
Introduction the on-line Process Method of Electric Joint Slack for Heat Rolling and Finish Rolling
浅谈热轧精轧电机联轴器在线加工方法
16.
Study on on-line temperature model in rough rolling zone of hot rolling strip and its application
热轧带钢粗轧区在线温度模型研究及应用
17.
1700mm Steelmaking-Continuous Casting-Continuous Rolling Near Net Shape Process Modernization in AISC
鞍钢1700炼钢-连铸连轧短流程现代化技术改造
18.
Development of the PP spunlaid and thermal-bonded line with a width of 5.1 meters
幅宽5.1米丙纶纺粘热轧生产线的研制