1.
high speed microhole EDM machine
高速电火花小孔加工机床
2.
Numerical Simulation of the debris distribution in Liquid-Solid Two-Phase Flow Field of High Speed Small Hole EDM drilling
高速电火花小孔加工放电间隙液固两相流场蚀除微粒分布数值模拟
3.
Rapid EDM systems for micro and small holes with high-aspect-ratio
大深径比微小孔快速电火花加工系统
4.
ectrospark perforating electrode tube
高速电火花打孔电极管
5.
Electrode Clamping Mechanism for EDM Small Hole Drilling;
电火花小孔加工电极夹持机构的研究
6.
Experimental Research on EDM of Carbides in Small Holes
硬质合金小孔电火花加工的实验研究
7.
The Technical Study of Electrical Discharge Machining to Micro-hole on B_4C Ceramic;
碳化硼陶瓷电火花微小孔加工工艺规律的研究
8.
The Study on Parameter Optimization and Model of Electric Discharge Machining (EDM) Micro-And-Small Holes;
电火花微小孔加工工艺参数优化及建模的研究
9.
Study on Control Method and Parameter Optimization in Micro and Small Hole EDM;
电火花微小孔加工控制方法及参数优化的研究
10.
Research on the Key Technologies of Micro and Small Hole EDM;
微细及小孔电火花加工的关键技术研究
11.
Simulation and Experiments of Small-Hole EDM by Current Dividing
分流法小孔电火花加工数值模拟及试验
12.
Small Hole Machining Mechanism and Simulation Experiment Research of Magnetic Field Compounded with EDM
磁场电火花复合小孔加工机理及仿真实验研究
13.
Research on Deep Small Hole Machining Based on Analysis of Flow Field
基于流场分析的微细电火花深小孔加工的研究
14.
Improved method for processing small holes on ordinary EDM machine
普通电火花成型机床加工小孔的改进方法
15.
Fluid Field Simulation of Debris Driven During Small Hole Permanent Magnetic Field And EDM Compound Drilling
永磁电火花复合深小孔加工流场排屑模拟
16.
Experimental Study of Small-hole EDM by Area-Equalizing Current Dividing
小孔的等面积分流法电火花加工试验研究
17.
Gap Flow Research for Deep-Small Hole Drilling by EDM Based on Fluent Software
基于Fluent电火花深小孔加工间隙流场的研究
18.
An Experimental Exploring on Machining Internal Thread of Hardened Steel by EDM
电火花加工淬火钢螺纹孔的实验探讨