1.
For the multiaxial proportional loading, the dispersion degree of fatigue cracks was low.
在多轴比例加载条件下，裂纹分布的分散性较小。
2.
ANALYSIS ON THE REGULATION OF STRESS CRACK DISTRIBUTION OF RFCC REGENERATOR
重油催化再生器应力腐蚀裂纹分布规律分析
3.
Effect of Fatigue Damage on Distribution of Cracks in 3D C/SiC Composites
疲劳损伤对3D C/SiC复合材料裂纹分布的影响
4.
Analytical Study on Cracking Distribution Law and Mechanism of RC Beams Strengthened with GFRP;
复合钢筋混凝土新结构的裂纹分布规律及机理分析研究
5.
Relationship between stress distribution along slant crack and opening displacement on crack-surface
倾斜裂纹的应力分布与裂纹面开口位移的关系
6.
CONTINOUS DISLOCATION DISTRIBUTION MODEL OF MODE Ⅲ INTERFACE CRACK UNDER HOMOGENOUSLY DISTRIBUTED SURFACE LOAD
裂纹面受均布载荷作用的Ⅲ型界面裂纹的位错连续分布模型
7.
Effect of in-crack water pressure distribution on the fracture behavior of concrete gravity dams
裂纹内水压分布对重力坝断裂特性的影响
8.
Reliability analysis for fatigue propagation life with arbitrary distribution parameters
任意分布参数疲劳裂纹扩展寿命的可靠性分析
9.
Investigation on stress field on crackle tip by holographic interferometry
全息干涉法研究裂纹尖端应力状态分布
10.
Study on Distribution of Stress and Strain in Interface Crack of Polymer Glue Joint;
高聚物胶接界面裂纹应力应变分布的研究
11.
The window was veined with cracks.
那窗户布满了道道裂纹。
12.
General Weight Function and Finite Variation for Determination SIF Distribution History Along 3-D Crack Fronts
求解三维裂纹前缘SIF分布时间历程的通用权函数法和有限变分法
13.
Reliability analysis of turbine disk crack propagation life with arbitrary distribution parameters
任意分布参数的涡轮盘裂纹扩展寿命可靠性分析
14.
Effect of Triaxial Stress on the Plastic Zone Distribution in Front of Crack Tip with Mixed Mode Loading
三轴应力状态下复合型裂纹尖端前缘的塑性区分布
15.
Crack Analysis in Heat Treatment of Cr12MoV Convex Mold;
Cr12MoV凸模热处理裂纹分析
16.
Transverse crack analysis of SWRH 82B wire rod drawing
SWRH82B盘条拉拔横裂纹分析
17.
Fracture Analysis of Piezoelectric Materials with Centric Cracks
中心裂纹压电材料板的断裂问题分析
18.
Resarch on crack preventing on-line in 40GrNiMo specimen with edge crack and its microstructure analysis
40GrNiMo试件单边裂纹在线止裂及组织分析