1.
Research on Stud Welding and Middle-thickness Board with Compound Heat Source;
螺柱与中厚高强钢复合热源螺柱焊试验研究
2.
Welding Torch Research and Technological Experiment for Automatic Stud Welding with Hybrid Resource
复合热源自动螺柱焊焊枪装置研制及工艺试验
3.
Research on Welding Technics and Performance Analysis of Large Diameter Stud with Compound Heat Source
大直径螺柱复合热源工艺试验研究及性能分析研究
4.
Numerical Simulation of Weld Formation in Laser+GMAW-P Hybrid Welding
激光+GMAW-P复合热源焊焊缝成形的数值模拟
5.
Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31
AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响
6.
Technological Investigation on Laser-MAG Hybrid Welding of High Strength Steels
高强钢激光-MAG复合热源焊接工艺研究
7.
EFFECT OF ARC POWER ON THERMAL FIELD CHARACTERISTICS OF LASER+GMAW-P HYBRID WELDING
电弧功率对Laser+GMAW-P复合热源焊热场特征的影响
8.
Waveform Modulating System of Converter for Stud Welding of Car Body
轿车车身焊装用螺柱焊逆变电源波形控制系统
9.
Study of Laser-TIG Hybrid Welding Process for Magnesium Alloy and Its Numerical Simulation;
镁合金复合热源焊接工艺与数值模拟研究
10.
Fusion-brazing Joining for Dissimilar Metals Between 5A02 Aluminium Alloy and Zinc-coated Steel Based on Laser-MIG Hybrid Welding
基于激光——MIG复合热源的5A02铝合金/镀锌钢熔——钎焊
11.
Research on Studs Hybrid Heat Source Welding Technology and the Theoretical Test Prototype;
附座复合热源焊接方法与原理试验样机的研究
12.
Analysis of Droplet Transfer Behavior in CO_2 Laser-MIG Hybrid Welding Process;
CO_2激光-MIG复合热源焊接熔滴过渡的行为分析
13.
Study on the Laser-TIG Hybrid Welding of Dissimilar Magnesium Alloy and Steel with Ni as Interlayer
镁/钢异种金属激光-TIG复合热源镍夹层焊接研究
14.
On the Characteristics of Nd: YAG Laser-Short Circuiting Transfer GMA Hybrid Welding
Nd：YAG激光—短路过渡GMAW复合热源焊接特性研究
15.
Finite Element Analysis of the Welding Temperature Profiles and Thermal Distortion in Laser +GMAW Hybrid Welding Process;
激光+GMAW复合热源焊接温度场和热变形的有限元分析
16.
Study on Laser-metal Active Gas (MAG) Hybrid Welding Technology and Its Mechanism of Stainless Steel;
不锈钢激光-MAG电弧复合热源焊接工艺及机理研究
17.
Appearance of weld and impact toughness for the joints of ferrite stainless steel by laser-MAG hybrid welding
铁素体不锈钢激光-MAG复合热源焊缝成形及接头冲击韧性分析
18.
This article breifly introduces polymer matrix composites and highights a number of welding processes, such as hot plate welding, infrared welding, induction welding, vibration welding and ultrasonic welding, etc.
本文主要介绍了热塑性复合材料的若干种焊接方法，如热板焊、红外焊、应焊、动焊、声波焊等。