1.
3D Finite Element Analysis of Transverse Welding Joint in Aluminum Alloy During Billet-to-billet Extrusion Process
铝合金锭接锭挤压过程中横向焊缝的有限元分析
2.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
3.
Judge of Transverse Crack of Thick-Walled Seam by Ultrasonic Testing Method
厚壁焊缝横向裂纹的超声波判别方法
4.
Transverse/cross/lateral contraction deformation：The component contracts in the upright direction of weld after weiding.
横向收缩变形：构件焊后在垂直焊缝方向上发生的收缩。
5.
YS Automatic Girth Welder (YS-AGW-I/II) is mainly used in horizontal girth inside / outside welding of large tanks、vessel etc. The welder applies submerged arc welding.
型埋弧自动横焊机采用埋弧横向焊接工艺，主要用于大型储罐、容器等内外环缝的焊接.
6.
Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking.
在靠近主梁腹板的横向坡口焊缝处常常出现未熔透而导致裂纹。
7.
Optimization of transverse induction coil structure and its influence on heat treatment of welded seam
横向磁场感应器结构优化及对焊缝加热效果的影响
8.
horizontal rolled position
转动横向焊位置(指管子环形接头横向焊
9.
horizontal fixed position
固定横向焊位置(指管子环形接头横向焊
10.
allowable offset in longitudinal joints
纵向焊缝的允许偏移
11.
Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding
搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究
12.
Research on Tensile Test in the Condition of Weld Line Placed Perpendicular to Tensile Direction
焊缝垂直拉伸方向的拼焊板单向拉伸实验研究
13.
Study on Fatigue Behavior of Transverse Joints of AZ31B Magnesium Alloys with TIG-Welding;
AZ31B镁合金TIG焊横向接头疲劳性能研究
14.
Transverse series slot array in phase
横向串联缝隙同相天线阵
15.
The Effect of Transverse Cracks on Rigidity and Strength of CRCP Pavement;
横向裂缝对CRCP路面刚度和强度的影响
16.
Study on Defction of Transverse Joints of Simply-Supported Hollow Slab Girder Bridges
空心板简支梁桥横向铰接缝病害分析
17.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
18.
The crackes are common problem of Daqu starter and they include transverse crackes, vertical crackes and circumferential crackes.
裂缝是大曲的常见病症，有横向、纵向和环形裂缝几种。