1.
Study of Heat Transfer Enhancement and Axial Load-Bearing Capability of Corrugated Tubes;
波纹管传热强化及其轴向承载能力研究
2.
Research the Bearing Capacity of Universal-joint Spindle in 170 Piercing Mill Main Transmission System
170穿孔机主传动系统万向接轴承载能力分析
3.
Study on the Carrying Capacity for Cylindrical Roller Bearings Made of New Materials;
新型材料圆柱滚子轴承承载能力研究
4.
Mechanical Behavior of Spherical Plain Bearing Joint under Uni-directional Load
单向载荷作用下向心关节轴承球铰节点的受力性能
5.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
6.
Study of Load Carrying Capacity of Cold-Formed Square Hollow Section Columns under Axial Load;
轴心受压冷弯方管柱承载力性能研究
7.
Load carrying ability of tapered roller bearing on new high speed rock bit
新型高速牙轮钻头圆锥滚子轴承承载能力分析
8.
Study on Influence of Particles in Water Film on the Loading Capacity of Water-lubricated Bearings
杂质颗粒对水润滑滑动轴承承载能力的影响
9.
Increasing total load-carring area of thrust blok in the thrust bearing, increasing cooling area, the load-carring ability has been improved
通过增加推力轴承的推力块总承压面积，增加冷却面积，提高了推力轴承的承载能力
10.
Experimental Research of Ultimate Bearing Capacity of Frame Column Section with Two-way Placed Ducts for Tendons or Strands under Axes-Pressure;
双向留设预应力筋孔道框架柱轴向受力时截面承载力试验研究
11.
Structural Analysis of Induction Power Magnetic Bearing and Design of Axial Loading Platform
感应型动力磁轴承结构分析及轴向加载实验平台设计
12.
All loading pads shall be capable of pivoting in relation to the direction of the applied force and the pivot point shall be as close as practically possible to the load surface.
所有的坐垫要能够做到相对于用力方向的绕轴旋转以及该旋转点要和承载面尽可能地靠拢。
13.
Aarameter design of switch power amplifier for dynamic load capability of AMB
磁轴承大动载能力与开关功放参数的设计
14.
Research on Load Carrying Capacity of a New Type of Light Gauge Steel System Square Studs;
轻钢龙骨体系四方柱轴压承载能力的研究
15.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。
16.
Numerical Simulation on the Unidirectional Extruding Capacity of Downhole Casing
井下套管单向挤压承载能力数值模拟
17.
RESEARCH ON VERTICAL LOAD-BEARING PROPERTIES OF BORED PILE
钻孔灌注桩竖向承载能力的试验研究
18.
Bearings shall be specifically selected to carry all radial and axial loads imposed by the pump and motor.
这些轴承都是经过特别挑选,能够承担由泵和电机产生的径向和轴向负载。