1.
Approaching of Factors Influencing Strength Indexes for the Consolidation Quick Direct Test
直剪试验固结快剪强度指标影响因素探讨
2.
Shear Strength Behavior of Over-consolidation Clay in Ring Shear Tests;
利用环剪仪对超固结黏土抗剪强度特性的研究
3.
Shear strength behavior of overconsolidated clay in ring shear tests
采用环剪仪对超固结黏土抗剪强度特性的研究
4.
The investigation of shear strength of partly consolidated clay
未完全固结软粘土抗剪强度试验研究
5.
Experimental Study on the Shear Capacity of Post-installed Anchor Group in Concrete Structures;
混凝土结构后锚固群锚抗剪试验研究
6.
Effect of Consolidation Time on Dynamic Shear Modulus of Soft Clay
固结时间对软粘土动剪切模量的影响
7.
Creep Characteristics for Consolidated-Undrained Triaxial Compression of Yingkou Soft Soil
营口软土的固结不排水剪切蠕变特性
8.
Experimental study on shear bonding strength of textile reinforced concrete (TRC) for strengthening
TRC加固构件抗剪粘结强度试验研究
9.
The Evaluation of Factors Affecting Retention of Several Prefabricated Posts Using Push-out Tests;
几种预成桩固位影响因素的剪切粘结实验研究
10.
Analysis of Shearing Load-Carrying Capacity of Post-Installed Fastenings Anchor Group System in Concrete Structures
混凝土结构后锚固群锚系统抗剪承载力分析
11.
ANALYSIS OF INTERMEDIATE SHEAR STRESS IN CRACKED RC BEAMS STRENGTHENED WITH FRP
FRP片材加固开裂RC梁跨中界面粘结剪应力分析
12.
Study of monotonic and coupling cyclic shear characteristics of overconsolidated clay
超固结黏土单调和耦合循环的剪切特性研究
13.
Shear Lag Theory Analysis of Carbon Fibre Reinforced Concrete Structure
碳纤维加固混凝土结构的剪滞理论分析
14.
Strengthening Construction Technology for Prefabricated Frame Shear Wall Structure on Some Office Building
某办公楼装配式框架剪力墙结构加固施工
15.
The Research on Speeding up the Drainage Consolidation of the Project of Reinforcing the Yellow River Dike by Desilting
黄河放淤固堤工程加快淤背体排水固结研究
16.
Heavy pruning was practiced to build up the strong tree framework required to bear the fruit in later years.
为了建成今后几年内结果所要求的牢固骨架，需要采取重剪。
17.
Experimental Study on Shear Strength and Anchorage Behavior of Steel Tie Bar and Expansion Bolt in Shale Perforated Brick Masonry;
页岩多孔砖砌体抗剪性能与拉结筋、膨胀螺栓锚固性能的试验研究
18.
Reason for Low Tight Axle Strength of 10.9S Sets of Torshear Type High Strength Bolt for Steel Structures
钢结构用10.9S扭剪型高强螺栓连接副紧固轴力偏低原因分析