1.
Technology of Tank Tube Wall Construction of Climate Laboratory in 1000 kV A.C.UHV Test Base
1000kV特高压交流试验基地环境气候实验室罐体筒壁施工技术
2.
Study on the Thickness Calculation Method of Viscoelastic Materials Cylinder Liquid Tank
圆筒形黏弹性材料液体储罐壁厚计算方法研究
3.
shingled construction of tank
套筒式油罐罐体结构
4.
Optimum Design for the Shell Vessel--Railway Charge Can
薄壁容器——铁路散装货罐体的优化设计
5.
Drum Support:For lifting a drum or other solid objects onto the beam.
圆筒支架：用于将圆罐等坚固物体防止到横梁上。
6.
FE Simulating and Technics for Forming of Large Thick Cylinder;
大型厚壁筒体成形工艺及有限元模拟
7.
Cylinder Wall Thickness Calculation in A-317 of ASME Code Section Ⅰ Power Boilers (2007 Edition)
ASME CODEI卷中圆筒体壁厚的计算式
8.
The side of the bridge or division between cells on a gravure cylinder or the thickness of material on a base cylinder shell.
中义凹版辊筒墨坑间的间隔的侧壁或在辊筒上物体的厚度。
9.
STRUCTURAL DESIGN OF AN ELEVATED CONSTANT-PRESSURE TANK SUPPORTED BY A THIN-WALLED STEEL CYLINDER
薄壁筒体承重钢结构高位稳压水箱结构设计
10.
BDF HIGH STRENGTH THIN-WALL BOX OR TUBE FILLER CAST-IN-SITU HOLLOW CONCRETE FLOOR SYSTEM
BDF高强薄壁箱体、筒芯现浇混凝土空心楼盖技术
11.
Assessment and Strengthening of Large-scale Thin-wall Steel Cylindrical Tower After Fire
大型薄壁筒体钢塔火灾后评估与加固处理
12.
bullet type tank
卧式圆筒形压力储罐
13.
Beer cans are cylindrical.
啤酒罐子是圆筒形的。
14.
Discharge Characteristics Induced By Self-Excited by Radio Frequency During Plasma Ion Implantation of Cylindrical Bore
等离子体离子注入管筒内壁自激射频放电等离子体特性(英文)
15.
Technical standard for external surface cathodic protection of bottom of steel storage tanks
钢制储罐罐底外壁阴极保护技术标准
16.
Stress Analysis of Flat Extrusion Container for Aluminum Wall-plate by Photoelastic and FEA Method;
大型整体壁板扁挤压筒的应力光弹性及有限元分析
17.
STUDY ON THE INFLUENCE OF NOZZLE-VESSEL THICKNESS RATIO ON LARGE OPENING IN PRESSURE VESSELS
接管与筒体壁厚比对压力容器大开孔应力的影响
18.
Numerical Simulation and Optimization for Counter-pressure Casting Process of Large-scale Thin-wall Al Alloy Cylindrical Casting
大型薄壁铝合金筒体铸件差压铸造过程数值模拟与工艺优化