1.
Discussion and Practice of Vertical Parallel Hole Caving Technology with Sub-level Filling Method
分段充填采矿法垂直平行孔落矿技术探讨与实践
2.
horizontal cut and fill stoping
水平分层充填采矿法
3.
Finite Element Analysis of Filling Mass -Orebody-Rock Mass Stability for High-Level-Mining in Anqing Copper Mine
安庆铜矿高阶段回采充填体—矿体—岩体稳定性的有限元分析
4.
Research on the Optimization of Structural Parameters for Heavy Ore-body by Sublevel Open-Stope with Subsequent Filling
厚大矿体分段空场嗣后充填采场结构参数优化研究
5.
PRACTICE IN BLASTING TECHNOLOGY FOR SUBLEVEL FILL STOPING IN FENGSHAN COPPER MINE
丰山铜矿分段充填法的爆破工艺实践
6.
timbered horizontal cut and fill stoping
木支护的水平分层充填采矿法
7.
Integrated Technology of Middle Pillar Stoping Under Dry Filling Materials
干式充填体下中段矿柱回采综合技术研究
8.
Application of Room and Pillar Mining Method in Under-sea Deposit
分矿房矿柱分层充填法在海底开采中的应用
9.
Application of the Upwards Cut-fill Mining Method in Ganzhou Uranium Mine and its Prospect
上向分层充填采矿法在赣州铀矿的应用及展望
10.
Optimization Design and Numerical Analysis of Excavating-filling Engineering for Lean Ore in Jinchuan No.2 Minefield
金川二矿贫矿开采充填设计优化及数值分析
11.
square set and back filling method
方框支架充填采矿法
12.
Analysis on the Stability of Fill of Extra Large Stopes in Anqing Copper Mine
安庆铜矿特大型采场充填体稳定性分析
13.
Numerical analysis of fluid-solid coupling on large range filling mining and optimization
大面积充填采矿时的流固耦合数值分析及优化
14.
Analysis and Evaluation of Systemic Security for Deep Exploitation Filling Mining in Tonglushan Mine;
大冶铜绿山矿地下开采充填采矿法系统安全性分析及评价
15.
It is a key for a high level pillar mining's success to prevent backfill from being destroyed.
充填体不产生大规模破坏是高阶段矿柱成功回采的关键。
16.
Analysis of filling effect and filling ratio of backfill mining in longwall face
长壁工作面充填开采的充填比与充填效应分析
17.
Experimental Study on Mining Method of Dry Backf Illing in Shanggong Gold Mine;
上宫金矿干式充填采矿方法试验研究
18.
The indoor experiment on the filling materials used for downward slicing drift mining with cemented bacKfill in Gaolong Gold Mine was performed.
对高龙金矿下向分层进路胶结充填采矿法所用的充填材料进行了室内试验研究。