1.
Study on Preparation Technology, Microstructure and Properties of La-Mo Alloy Slab
La-Mo合金板坯的制备工艺及组织性能研究
2.
Research on Rolling Technology, Microstructure and Properties of La-Mo Alloy Plate
La-Mo合金板轧制工艺及组织性能研究
3.
Research on TRIP steel with Nb and Mo by thin slab casting and rolling process
薄板坯连铸连轧Nb-Mo微合金TRIP钢的研究
4.
Study on Preparation Technology and Property of La-Mo Alloy Powder
La-Mo合金粉的制备工艺及性能研究
5.
Effects of La on isothermal oxidation behavior of a Ni-Cr-W-Mo heat-resistant alloy at 1173 K
La对Ni-Cr-W-Mo耐热合金1173K恒温氧化行为的影响
6.
PIV Simulation and Optimization for Melt Flow in Continuous Casting of Aluminum Alloy Slab;
铝合金板坯连铸PIV模拟及工艺优化
7.
Study on Homogenization of Al0.8Mn0.5Fe Stock Alloy Strips by Continuous Cast-rolling;
Al0.8Mn0.5Fe合金铸轧板坯均匀化研究
8.
Producing 3004 aluminum alloy deep-drawing slabs by casting-rolling method
采用铸轧法生产3004铝合金深冲板坯
9.
Discuss on cast-rolling technology of 5754 aluminium alloy strips
5754铝合金铸轧板坯生产工艺探讨
10.
Phases analysis of twin-roll casting AZ31 Mg alloy plate blank
双辊铸轧AZ31镁合金板坯的物相分析
11.
DPIV Physical Simulation of Melt Flow in a Mould during the Continuous Casting of Aluminium Alloy Slab;
铝合金板坯连铸过程流动现象的DPIV物理模拟
12.
The Downstream Rolling Process of Twin Roll Casting Magnesium Alloy Sheet AZ31B;
双辊铸轧AZ31B镁合金板坯的二次轧制工艺
13.
Research on Electromagnetic Semi-continuous Casting of 7050 Aluminium Alloy Slab;
7050铝合金板坯电磁半连续铸造技术研究
14.
Research on Soft-contact Electromagnetic Continuous Casting Technology of Ultra High Strength Aluminium Alloy Slabs
超高强铝合金板坯软接触电磁连铸工艺研究
15.
Numerical Simulation of Comprehensive Metallurgical Behavior of Liquid Steel in Slab Mold
板坯结晶器内钢液综合冶金行为的数值模拟
16.
Study on microstructure and precipitated phases in Al0.3Mn0.4Fe twin-roll casting Al-strip
Al_(0.3)Mn_(0.4)Fe合金铸轧板坯晶粒和析出相分析
17.
Effect of Mo Content on the Hydrogen Isotope Effect of Ti-Mo Alloy Hydrides
Mo含量对Ti-Mo合金氢同位素效应的影响
18.
Effects of Cu Chemical Plated Mo Powder on Microstructures and Properties of Mo-30Cu Alloy
Mo粉化学沉积Cu对Mo-30Cu合金组织性能的影响