1.
Study on the Residual Oil Distribution after Polymer Flooding and Feasibility of Secondary Polymer Driving
孤岛中区聚驱后剩余油分布规律及二次注聚可行性研究
2.
Shear Induced Interfacial Morphology Development of Polypropylene During over-Injection Molding
二次注射成型聚丙烯中剪切诱导连接界面的形态演变
3.
Redevelopment of Serial Number Marking by AutoCAD
序号标注的AutoCAD二次开发
4.
The Secondary Development of Autocad for Feed System of Injection Mold;
注塑模浇注系统的AutoCAD二次开发
5.
Development of AutoCAD on labeling taper and pitch according with chinese national standard used ARX
AutoCAD锥度、斜度国标标注的ARX二次开发
6.
There may also be annotations, or references, to relevant secondary sources.
针对二次资源也有注释和参考资料。
7.
Marking Technique and Secondary Development of Dimension Tolerance in AutoCAD2000;
AutoCAD2000中尺寸公差的标注技巧与二次开发
8.
Notes about the Ambrosetti-Rabinowitz Type Superquadraticity
关于Ambrosetti-Rabinowitz型超二次条件的注记
9.
UG-BASED REDEVELOPMENT OF CAD SYSTEM OF GEAR INJECTION MOLD
基于UG的齿轮注塑模CAD系统二次开发
10.
Construction Technologies for Secondary Lining of the Low Wall and Primary Filling of the Side Arch of Tunnel
隧道二次衬砌矮边墙与边拱一次灌注施工技术
11.
Two-shot binding: Adhesive binding in which the first application is of PVA adhesive, the second of hot-melt adhesive.
两次胶胶装:第一次涂聚乙烯醇(白胶浆), 第二次涂热熔胶的胶装方式.
12.
Morphorlogical Controlling and Hierarchy Structure of Injection-molded Polyolefin;
聚烯烃注射成型制品的形态控制和多层次结构
13.
The Characterization of Hierarchy Structure in Injection Molded Polypropylene Blending System;
聚丙烯共混体系注塑成型制品多层次结构表征
14.
Multi-Layered Structure of iPP Molded by Gas-Assisted Injection Molding
气体辅助注射成型聚丙烯的多层次结构
15.
Determination of Trace Butadiene-1,2 in the Polymerzation Grade Butadiene-1, 3 by Secondary Gas Chromatography
聚合级丁二烯-1,3中痕量丁二烯-1,2的二次气相色谱测定
16.
The zero sequence current transformer is full enclosed type. The secondary windings and iron core are insulated by epoxy resin. The middle hole is used for cable going through.
本型零序电流互感器为全封闭式。二次绕组及铁芯均浇注在聚脂树脂内。中间窗孔供三相电缆穿过。
17.
Design and Implement on the Prospecting Well Operation Management System Based on Workflow
喇嘛甸油田二类油层聚驱分质分层注入研究
18.
Properties of in-situ polymerized casting polyurethane/nano-silica composites
原位聚合法浇注型聚氨酯弹性体/纳米二氧化硅复合材料的性能