1.
Microstructure and Property of 20CrNi Steel Roller Treated by Laser Surface Melting
激光熔凝处理20CrNi钢轧辊的组织及性能
2.
Structure and Hardness of High C-Cr Roller Steel Treated by Laser Melting
激光熔凝处理高碳高铬轧辊钢的组织及硬度
3.
Experimental Study of Laser Melting and Laser Shock on Magnesium Alloys;
激光熔凝和激光冲击处理镁合金的实验研究
4.
Microstructure and Depth of Harden Layer of 40Cr Steel Melting Treated with Different Lasers
不同激光器熔凝处理40Cr钢硬化层的显微组织及深度
5.
Growth of Laser Initial Damage in Conditioned Fused Silica at 355 nm
经355nm激光预处理后熔石英的损伤增长
6.
The micro mechanism of the laser-remelting and analyzed by thermodynamic;
激光熔凝的微观机理及热力学初步分析
7.
Effect of Laser Surface Melting on the Surface Microstructure and Fatigue Crack Growth Behavior of Al-Si Cast Alloys;
激光表面熔凝处理对铸造Al-Si合金的表层组织及疲劳裂纹扩展行为的影响
8.
Modeling and Numerical Simulation on Laser Remelting and Cladding
激光熔凝和激光熔覆的数学模型及数值分析
9.
Defects in Laser Remelting Layer of AZ91D Magnesium Alloy
AZ91D镁合金激光熔凝层的缺陷
10.
Study on the Mechanism of Penetration Mode for Thin Sheet Laser Deep Penetration Welding;
薄板激光深熔焊接熔透模式的机理研究
11.
Ultrasonic Melt Treatment and Solidification of 7055 Aluminum Alloy;
7055铝合金熔体超声处理与凝固研究
12.
Research on Melt Treatment and Solidification Characteristics of Al-Fe Alloy;
Al-Fe合金熔体处理及凝固特性研究
13.
Effect of Superheat Treatment on Solidification Structure of ZL114A Alloy
熔体超温处理对ZL114A凝固组织的影响
14.
Influence of laser melting on microstructure and properties of 1Cr18Ni9Ti welding joint
激光熔凝对1Cr18Ni9Ti焊接接头组织和性能的影响
15.
Effect of Incident Angle on Laser Melted Layer Microstructure and Properties
入射角度对激光熔凝层组织及性能的影响
16.
Abnormal Grain Coarsening of Laser Surface Remelting Rapidly Solidified TA15 Titanium Alloy
TA15钛合金激光表面重熔快速凝固晶粒异常粗化
17.
LASER GLAZING RAPIDLY SOLIDIFIED MICROSTRUCTURE OF DD8 SINGLE CRYSTAL Ni-BASED SUPERALLOY
单晶镍基高温合金DD8激光快速熔凝组织
18.
Microstructure of laser clad Ni-based alloy and Ni+Cr_3C_2 composite coatings
激光熔覆Ni基与Ni+Cr_3C_2合金涂层凝固组织特征