1.
Study on Microstructure and Property of Cold Rolled and Continuous Annealled DP Steel with Low C-Si-Mn System
低碳硅锰系冷轧连续退火DP钢组织性能研究
2.
Research on Microstructure Evolution Laws of Low-C-Si-Mn TRIP Steels
低碳-硅-锰系TRIP钢的组织演变规律研究
3.
Guimeng alloys, an electric high-carbon, ferromanganese, low ferromanganese smelting sales.
硅锰合金、电炉高碳、锰铁、低度锰铁冶炼销售。
4.
This paper describes the experiments of making medium carbon ferromangan- ese by “low basicity process” using import manganese ore.
本文介绍了用低碱度法代替传统电硅热法,使用进口锰矿冶炼中碳锰铁的试验情况。
5.
Practice of Silicon Content Control in low Carbon low Silicon Al-killed Steel at JISCO
酒钢低碳低硅铝镇静钢硅的控制实践
6.
Discuss on sulphur control plan of WISCO CSP low cabon,low silicon and low sulphur steel
武钢CSP低碳低硅低硫钢控硫方案探讨
7.
Preparation of SiC Whiskers by Low-temperature Decomposition of Silicon Nitride
氮化硅低温转化合成碳化硅晶须研究
8.
Effect of Manganese Content on Structures and Properties of Low Carbon White Cast Iron
锰对低碳白口铸铁组织与性能的影响
9.
An Investigation on Structure and Properties of Cr-Ni-Mn-Mo Low Carbon High Alloy Steel;
铬镍锰钼低碳高合金钢组织性能研究
10.
Influences of deformation parameters on microstructures and mechanical properties of low carbon manganese steel
变形制度对低碳锰钢组织性能的影响
11.
Effect of Technological Parameters on Microstructure of SiC Particulate Reinforced High Manganese Steel Matrix Composite with Process of V-EPC
工艺条件对高锰钢铸渗碳化硅组织特征的影响
12.
The effect of C and Mn contents on ferrite nucleation rate during Deformation-Enhanced Ferrite Transformation (DEFT) in low carbon (Mn) steels was investigated.
研究了碳、锰含量对低碳(锰)钢形变强化铁素体晶粒数目变化的影响.
13.
Test & study for billet CC of low carbon & silicon steel
低碳、低硅钢小方坯连铸的试验与研究
14.
Guimeng, electric, chromium manganese, ferro-alloys such as ferromanganese products.
硅锰、硅铁、铬锰、锰铁等铁合金产品。
15.
Silicon Carbide Fibers with Low Oxygen Content Prepared by Dry Spinning;
干法纺丝法制备低氧含量碳化硅纤维
16.
Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
GB/T5686.5-1988锰硅合金化学分析方法红外线吸收法测定碳量
17.
Methods for chemical analysis of silicomanganese alloy--The gasometric method for the determination of carbon content
GB/T5686.6-1988锰硅合金化学分析方法气体容量法测定碳量
18.
The Effect of Alloying Elements on the Continuous Cooling Transformation Diagrams and Hardenability of Medium Carbon Si-Mn-Mo-V Steels
合金元素对中碳硅锰钼钒钢连续冷却转变及淬透性的影响