1.
THEOREITICAL STUDY ON OPTIMIZATION OF OPERATING PARAMETERS IN OPTICALLY PUMPED CAVITY NH_3 SMMWLASER;
光泵腔式NH_3分子亚毫米波激光器最佳工作参数的理论研究
2.
The Meathod of the Steepest Ascent and the Determination of Optimal Technical Operating Parameters
最陡坡法与最佳工艺操作参数的确定
3.
Research on the Best Parameter of Shendong Mine Fully Mechanized Face;
神东矿区综采工作面最佳参数的研究
4.
The optimal technique parameter mensuration of sodium fluoride adsorb hydrogen fluoride
氟化钠吸附氟化氢最佳工艺参数测定
5.
The Study on the Best Content for the Film and the Technical Parameter;
缓释肥料最佳膜组分及加工工艺参数研究
6.
The Experimental Study on Damp and Hot Buckwheat Drying Technology and Optimum Parameters;
湿热荞麦干燥工艺及最佳工艺参数的试验研究
7.
Study on Three-parameter Optical Shift Schedule and Control Method of Construction Vehicle
工程车辆三参数最佳换挡规律及控制方法研究
8.
Study on gasification wastewater treatment by SBR process
SBR工艺处理煤气废水的最佳运行参数研究
9.
Body building function and choice of best design parameter of sanna bath;
桑拿浴的健身作用及最佳设计参数的选取
10.
if other parameters are fixed the system possesses the optimal pressure ratio which make the COP has extremes under the condition.
在其它参数确定时,存在最佳压比,可使系统工作性能系数在该条件下达极值。
11.
Digitization--The Best Route for Urban Construction Archives Works' Refinement Management
数字化——城建档案工作精细化管理的最佳途径
12.
t invariant estimate of location parameter
局部参数的最佳不变量估计;局部参数的最佳不变量估计
13.
Affecting factors and the optimum technological parameters in waste particleboard liquefaction
废弃刨花板苯酚液化的影响因素及最佳工艺参数
14.
Theory of Rolling Ball Flowmeter(Ⅱ)--Optimal Design of Parameters
滚珠流量计的机理(二)——最佳参数设计
15.
According to the U. S. Labor Department, Winston compiled the best work record in U. S. history.
依照美国劳动局的数据记载，温斯顿创下了美国最佳工作记录史。
16.
Optimal Temporal Parameters for Rice Mapping Based on ASAR Data
基于ASAR数据的水稻制图最佳时相参数提取
17.
The process for the treatment of the waste acid from crude benzol refining with calcining process is studied, the optimum operation data are discussed and the process is optimized.
研究了焙烧法处理粗苯精制废酸的工艺过程,探讨了最佳运行参数,优化了工艺流程。
18.
The technological parameters for producing good quality coated glass at low pull out rate were optimized.
通过生产实践,获得了低拉引速度下产品质量好,生产周期较长的最佳镀膜工艺参数。