1.
Interface Assignment, Bandwidth Allocation and Scheduling for Wireless Mesh Networks
无线Mesh网络中网卡配置、带宽分配和调度相关问题研究
2.
Your Network card is not properly configured, and you have no modem connections.
您的网卡配置不正确，并且没有调制解调器连接。
3.
Your Network card is not properly configured, and you Work modem is missing.
您的网卡配置不正确，并且缺少工作调制解调器。
4.
Your Network card is not properly configured, and you have no modem connections.\0
您的网卡配置不正确，并且没有调制解调器连接。\0
5.
Your Network card is not properly configured, and you Work modem is missing.\0
您的网卡配置不正确，并且缺少工作调制解调器。\0
6.
Enables you to set up and configure a network adapter card and network protocol.
允许你设置和配置一个网络适配卡和网络协议。
7.
Use this tab to configure the network protocol and settings.
使用此选项卡来配置网络协议和设置。
8.
A Design and Implement of USB2.0 Interface of Configurable Wireless Network Card;
可配置无线网卡的USB2.0接口的设计与实现
9.
NIC Express v4.0 Double Net Card Binding Realizes Redundancy Installation , Disposition and Test of Ethernet Equipment
NIC Express v4.0双网卡绑定实现以太网设备冗余的安装、配置与测试
10.
"The network adapter card was configured using default settings. Verify that the default settings are the settings that should be used and modify them if necessary.
"网卡是使用默认设置配置的。请验证该默认设置是应该使用的设置并且如果需要请修改它。
11.
In addition, the packet/interrupt ratio can be user-configured or auto-sensed on such NICs.
此外，在这样的网卡上，包/中断比率可以由用户配置或者自动检测。
12.
You can configure this connection to use your smart card to log you into the remote network. Select whether to use your smart card with this connection.
您可以配置此连接来使用您的智能卡登录到远程网络。选择是否把您的智能卡用在此连接。
13.
The article discuss some problems such as the function and configuration of using Yuanzhi network system recovery card.
通过远志网卡型还原卡的功能,具体配置,及在机房管理维护实践中出现的问题进行探讨。
14.
There are no installed network adapter cards on the system. The configuration has been changed to allow remote clients to access this computer only.
本系统没有安装网络适配卡。已将配置改为只允许远程客户端访问此计算机。
15.
The network connection profile is corrupted.
网络连接配置文件损坏。
16.
On the Configuration and Application of Dynamips Virtual Network;
Dynamips虚拟网络配置与应用
17.
Before using this wizard, you must first install and configure your network cards, modems, cables, and device drivers.
使用这个向导之前，您必须先安装和配置网卡、调制解调器、电缆和设备驱动程序。
18.
Use Configure Your Server to set up and configure services for your network
请使用“配置服务器”设置并配置您的网络服务。