说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 变速搅拌
1.
Numerical Simulation and Experimental Study on the Flow Field in Tank Stirred by Unsteadily Rotational Impeller
变速搅拌槽内流场的数值模拟及实验研究
2.
She whipped the cream to make it thicker.
她搅拌奶油使它变稠。
3.
Application of AC Frequency Conversion for Speed Adjustment Controlled by PLC in Materials Milling System;
基于PLC控制的变频调速在物料搅拌系统中的应用
4.
Stir over a low speed briefly, then adjust to the middle speed, stir for1 minute until all the ingredients are well-combined.
先用电动搅拌器慢速略为搅拌均匀,再转成中速搅拌约1分钟或至完全均匀。
5.
Establishment of the Mathematical Model of the Constant-speed ontrol System of the Concrete Stir Transportation Vehicle Stir Tube
混凝土搅拌运输车拌筒恒速控制系统数学模型
6.
The agitator drive is comprised of a non-proprietary reducer which utilizes worm gearing to provide a variety of output speeds.
由非专利设计的蜗轮传动组成的搅拌驱动,提供多种搅拌速度。
7.
Cut open tea bags and stir into the dough until well-combined.
将茶包剪开后倒入,慢速搅拌均匀。
8.
Sprinkle the yeast and sugar over the water and mix at low speed.
往水里撒上酵母和糖,用慢速搅拌。
9.
My stomach felt like a blender on full speed.
我感到我的胃就像一个快速搅拌器。
10.
Comparison of Approximate Calculating Method for Critical Rotating Speed of Stirring Shaft
搅拌轴临界转速近似计算方法的比较
11.
Study of axial flow velocity in axially stirred tank
轴流桨搅拌槽内轴向流动速度的研究
12.
To stir or shape(material) with a paddle.
搅拌用木板搅拌或定形
13.
Study on Deformation Characteristic of Large Spacing Deep Mixing Pile Composite Foundation;
大桩距搅拌桩复合地基变形性状研究
14.
The Origin that Lao(捞) Means Jiaoban and Its Evolution in Southeast China
东南地区“捞”的“搅拌”义来源及其演变
15.
Nonuniform agitation/ quenching or nonuniform circulation of quenchant around a part results in an assortment of cooling rates that creates shape distor? tion.
搅拌/火不一致或部件周围淬火剂分布不均都可导致冷却速度不一而产生形变。
16.
Increase the speed and knead the dough until smooth and springy, about 8 minutes.
提高搅拌器速度将其搅打至面团匀滑及有弹性,大约8分钟。
17.
In a blender, mix all ingredients together on a low speed for 30 seconds.
将所有原料倒入掺和器中,慢速搅拌30秒。
18.
The slow speed reduces mechanical wear effect in the agitating process.
慢速旋转将减少在搅拌过程中机器的磨损效应。