1.
Study on the Molding Process of the Fe-Si Intermetallics Compounds Inner-heating Casing to Improve Thermal Shock Resistance
提高Fe-Si金属间化合物内加热套管抗热震性的成型工艺研究
2.
REASONS FOR LEAKAGE OF INTERNAL PIPE OF DOUBLE-PIPE HIGH PRESSURE AMMONIA HEATER AND TECHNICAL IMPROVEMENT
套管式高压氨加热器内管泄漏原因分析及技术改进
3.
Research on Intensifying Heat Transfer in Square Tubular Furnace;
方箱管式加热炉炉内的强化传热研究
4.
The tubular-cased heating element is the same type as those used in cook stoves.
套管式加热元件与电烤炉中所用的相同。
5.
Hot Working Windows of High Collapse Casing Steel Evaluated by Gleeble Simulation Techniques
高抗挤套管用钢热加工工艺的模拟研究
6.
Application and Modification of the Lye Sleeve Pipe Heater in Two-stream Digestion Process
碱液套管加热器在“双流法”溶出中的应用与改进
7.
Investigation on Heat Transfer of Falling Film Evaporation by Microwave Heating;
微波加热管内降膜蒸发过程的传热研究
8.
jacketed-pipe high-pressure steam preheater
高压蒸汽套管预热器
9.
Studies on the Catalysts for Catalytic Combustion of Propane and the Infra-red Heater for the Casting Head Gas;
丙烷催化燃烧催化剂的研究和油井套管气红外加热器的研制
10.
Welding Process Test and Application of Bottom Head and Heater Sleeve in Pressurizer
稳压器下封头与加热套管的焊接工艺试验及应用
11.
An Experimental Study and Numerical Simulation of Heat Transfer to Supercritical Carbon Dioxide in the Double-Pipe;
超临界二氧化碳在套管内流动换热的实验研究和数值模拟
12.
Numerical Analysis of Mixed Convective Heat Transfer in Vertical Concentric Cylinders Filled with a Porous Medium;
竖直同心套管内多孔介质中复合对流传热的数值研究
13.
The Design of Shrink-Fit or Overlaying Internally Construction and Fabrication of Pipe and Flange
接管和法兰内壁热套衬或堆焊的结构设计及其制造方法
14.
The prefabricated parts can also be made.
高温热风管道内衬，加热炉内衬等部位，可制成预制构件。
15.
d-drogue-type tanker
探管锥套式空中加油机
16.
Addition of chamfering shape on seating surface of joint bolt at atf cooler pipe area.
倒棱增加物的塑造在自动制冷管的范围内、头螺栓的座套表面。
17.
indoor and outdoor bus bar bushing
户内外母线式穿墙套管
18.
a mild pre-heating of the whole socket area is recommended. apply heat to parts to be joined. The preferred method is by oxy-acetylene flame.
建议对整个管套区域进行适当的预热。建议采用乙炔火焰对连接部件进行加热。