1.
The Study and Design on MWD Collection Joint of Downhole Engineerning Parameters
井下工程参数随钻测量短接设计与研究
2.
Underground Deep Hole Blasting Parameter Optimization in Chengchao Iron Mine
程潮铁矿井下中深孔爆破参数设计优化
3.
open caisson method in underground construction
地下工程沉井法施工
4.
drilling engineering data logging unit
钻井工程数据记录仪
5.
Design of Sending Subsystem of Well Parameter Telemetry Experimental System;
油井参数遥测试验系统井下发射分系统设计
6.
INFLUENCE OF STEAM INJECTION PARAMETERS ON WELL-BORE TEMPERATURE
热采井注汽工艺参数对井筒温度的影响
7.
Optimization of the large cone angle parameters of downhole oil/water separation hydrocyclone
井下油水分离旋流器大锥角参数优化
8.
Use of logging parameters to determine oil,oil-water limit
利用测井参数交会法确定油水层下限
9.
Different technological parameters of ball spinning are simulated.
对不同工艺参数下的滚珠旋压过程进行了模拟。
10.
Research on Underground Caverns Adjacent Stabilization and Support Parameters of LONGTAN Project;
龙滩工程地下洞室群围岩稳定和支护参数研究
11.
DISPLACEMENT BACK ANALYSIS OF PARAMETER FIELD IN UNDERGROUND ENGINEERING BASED ON EXCAVATION DAMAGED ZONE OF SURROUNDING ROCK
基于围岩松动圈的地下工程参数场位移反分析
12.
3D parametric design method for underground powerhouse of hydropower engineering
水电工程地下主厂房三维参数化设计方法
13.
Collectively-owned mining enterprises must survey and draw maps showing the correlation between surface and underground workings.
集体矿山企业必须测绘井上、井下工程对照图。
14.
Numerical Modeling and Optimum Engineering Design for Hole Shrinkage in Borehole Drilling at Salt and Gypsum Layers;
钻井工程中盐膏层井眼缩径的数值模拟及最佳工程设计研究
15.
The Design and Implementation of Oil Wells Multi-parameter Remote Monitoring System
油井多参数远程监控系统的设计与实现
16.
Computation module of initial marginal productionrate and its influencing factors
新井边际产量计算模型及参数影响程度
17.
(6) having an actually measured surface and underground engineering comparison drawing, a mining and excavation plan and a ventilation system drawing;
（六）有实测的井上、井下工程对照图、采掘工程平面图、通风系统图；
18.
draw-down exploratio
根据液面下降求储层基本参数的试井法