说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 车轮踏面磨耗
1.
Influence of wheel/rail parameters on wheel profile wear of high-speed train
高速列车轮轨参数对车轮踏面磨耗的影响
2.
Study on the Influence of Wheel Tread Worn and Roll Radii Difference on EMU System Dynamics
车轮踏面磨耗及轮径差对高速动车组动力学性能影响研究
3.
Analysis of Causes to Wheel Tread Wear and Cracking in Wheel Flange for Gondola Cars Specially for Transport of Coal on Shenhua Line and Measures for Improvement
神华线运煤专用敞车车轮踏面磨耗及轮缘裂纹原因分析及改进措施
4.
Analysis on Wheel Tread Groove Wear of Shanghai Subway Vehicles;
上海地铁车轮踏面沟槽磨耗原因分析
5.
Worn profile tread JM, JM_2 and JM_3 for locomotive wheel and the tread shelled-out
机车轮对JM、JM_2、JM_3磨耗型踏面及其剥离
6.
Research on the Influence of Brake Mode to Abnormal Wear of Wheelset Tread on Urban Mass Transit;
城市轨道交通制动模式对车轮踏面非正常磨耗影响的研究
7.
According to the features of the slot between the wheel tread and the brake shoe, we propose a method for the image inspection of brake shoe wear.
根据图像中车轮踏面与闸瓦之间存在弧形缝隙的特征,提出了闸瓦磨耗的图像检测方法。
8.
The worn wheel tyre contact surface has a concave revolutionary curved form with two principal curvatures.
磨耗后的车轮接触面,是内凹圆弧的旋转形成面,有两种主曲率。
9.
Research on the Effect of Tread Wear on Load Characteristics of CRH2-300 Bogie Frame
踏面磨耗对CRH2-300构架载荷特性影响研究
10.
Discussion on the Issue of Tread-Stripped of DF8B Locomotive Wheel
DF8B机车车轮踏面剥离问题初探
11.
Study on the Signal Processing Algorithm for Tread Surface Scrapes of Rail Wheelsets
列车车轮踏面擦伤信号处理算法研究
12.
Analysis on Crack Reason of Working-face of Wheel Surface-quenched by Flame
车轮踏面火焰表面淬火开裂原因初探
13.
The part of a wheel or tire that makes contact with the road or rails.
踏面车轮或轮胎与路面或轨道接触的部分
14.
Peeling is the main type of failure of wheel tread.
剥离是车轮踏面失效的主要类型。
15.
Wheel Tread Scratch Detection System Based on DSP
基于DSP的车轮踏面擦伤检测系统
16.
A Coupled Thermal-Contact Analysis on Worn Tread Wheels of Vehicles
铁路车辆磨耗型车轮的三维热接触耦合分析
17.
Locomotive and rolling stock wheel/rail frictional wear and energy-saving and consumption-reducing
铁道机车车辆轮轨的摩擦磨损与节能降耗
18.
Numerical Optimization Technique for Wheel Profile Considering the Normal Gap of the Wheel and Rail
基于轮轨法向间隙的车轮踏面优化方法