1.
Research on Initial Deformation Limit Index for Long-span Passenger Dedicated Railway Ballastless Track Bridge
客运专线大跨度无碴轨道桥梁初始变形限值研究
2.
Numerical Simulation in Finite Element of the Sedimentation of High Filled Roadbed
高填方路基沉降变形有限元数值模拟
3.
Numerical analysis of stretching limit for Al-Mg-Si based alloy auto body sheet
Al-Mg-Si基合金车身板胀形变形极限的数值分析
4.
Study on 2.5D Numerical Modeling for Transient Electromagnetic Method by Finite Element Method with Topography;
带地形的瞬变电磁2.5维有限元数值模拟研究
5.
Numerical Simulation of Deformation Behavior of Concrete-faced Rockfill Dam
混凝土堆石坝面板变形特性的有限元数值模拟
6.
Torsional Deformations and Their Critical Values for Long-span Bridges in Rail Transit
大跨度轨道交通桥梁扭转变形及其限值
7.
Finite element numerical implementation for simulation of deformation band in saturated sand
饱和砂土局部变形带模拟的有限元数值实现
8.
Finite element simulation of machining deformation for aeronautical monolithic component
航空整体结构件加工变形有限元数值仿真
9.
conical cup value
锥形杯突深冲极限值
10.
3D FEM Analysis for Ring Rolling Process of Difficult-to-deformation;
难变形材料环件轧制过程的三维有限元数值模拟
11.
Numerical Nonlinear Analysis on Stresses and Deformations by FEM and Study of Performance of Geogrids-Reinforced Earth Retaining Walls;
土工格栅加筋挡土墙应力与变形有限元数值分析及工作机理探讨
12.
FEM using adaptive topography and quadratic element in 2D MT forward modeling
自适应地形电磁场双二次变化MT二维有限元数值模拟
13.
The Contrastive Studying of Foundation Deformation under Vertical Homogeneously Distributed Load by Method of Finite Element Numerical Calculation and Spot Test Analysis
竖向均布荷载下地基变形有限元数值计算分析与实测对比研究
14.
deflection at working ultimate load
工作极限负荷下变形量
15.
The basic characteristics for variation of the volumetric deformations of dry sand with the input acceleration for different duration of vibratory motion and the corresponding limits are preseuted.
文中给出了不同振动时间的干砂体积变形随振动加速度变化的基本特性及相应的界限值。
16.
residual expansion of tank volume
罐体容积残余变形值
17.
Research on Deformation Mechanism and Forming Limits of Tube Inversion;
翻管变形机理及翻管成形极限的研究
18.
In order to analyse the deformation solidifying process with heat transfer in the continuous casting rolling, we establish the enthalpy finite element control mathematical model and develop the numerical value simulation software, which can trace the temperature and solidify time.
建立了变形体凝固传热焓式有限元控制数学模型，并开发了相应的连续铸轧过程数值仿真软件。