1.
Research on Mechanical Properties of the Q460 High-strength Angle Struts Eccentricity at Both Ends
Q460高强角钢两端偏心压杆力学性能研究
2.
Studies on Width to Thickness Ratio Limitation of High Strength(Q460) Equal-leg Angle Members under Axial Compression
Q460高强角钢轴压杆肢件宽厚比限值试验与理论研究
3.
Theoretical and Experimental Study on Integral Stability of High Strength (Q460) Angle Bars to Axial Compression
Q460高强角钢轴心受压构件整体稳定性的理论与试验研究
4.
Theoretical and Experimental Study on Q460 Single Equal Leg Angle Axial Compression Members
Q460高强等边单角钢轴心受压杆件的理论与试验研究
5.
Analysis on the Welding Technology of Q460 Low-alloy High-strength Steel
Q460低合金高强度钢的焊接工艺分析
6.
Experiments and Investigation on the Bearing Capacity and Stability of Q460 Equilateral-Angle Steel
Q460等边角钢稳定承载力的试验研究
7.
Local buckling of Q460 single equal-angle steel strut
Q460等边单角钢压杆的局部屈曲
8.
Experimental Research on Overal Stability for Eccentrically Compressed Q460 Hot-Rolled Single-Angle Members
两端偏心受压的Q460热轧等边单角钢整体稳定承载力试验研究
9.
High strength large hexagon nuts for steel structures
GB/T1229-1991钢结构用高强度大六角螺母
10.
High strength bolts with large hexagon head for steel structures
GB/T1228-1991钢结构用高强度大六角头螺栓
11.
dead-hard steel
极硬钢, 高硬钢, 高强钢
12.
Experimentation study and simulation analysis on high strength single-angle compression members attached by one leg
单边连接高强单角钢压杆试验研究和仿真分析
13.
EXPERIMENTAL STUDY ON THE MECHANICAL PROPERTIES OF HIGH STRENGTH ANGLE STEEL ATTACHED BY ONE LEG
单边连接高强角钢受压力学性能的试验研究
14.
Research on Welding Gradient Optimization Process of 80kg Heavy Gauge Steel Plate in Hydraulic Support
液压支架用80kg级高强钢焊接坡口角度优化研究
15.
Ultimate Bearing Capacity Analysis of High-Strength Single-Angle Compression Member Eccentrically at One End
高强单角钢一端偏心压杆极限承载力试验研究
16.
STUDY ON THE STABILITY DESIGN METHOD OF HIGH STRENGTH STEEL ANGLE MEMBERS UNDER AXIAL COMPRESSION
高强度角钢轴心受压构件稳定设计方法研究
17.
TMCP for new Q460-grade medium and heavy plate strengthened with fine grain
新型细晶强化Q460级宽厚板的TMCP工艺研究
18.
Study on the TMCP for the New Type Q460 Grade Medium and Heavy Plate Strengthened with Fine Grain
新型细晶强化中厚板Q460的控轧控冷工艺研究